Bosch Series 4 WGG04409GB Installation Instructions

To start a wash cycle, load your laundry into the drum, add detergent, and close the door. Use the control dial to select your desired wash program and press the 'Start' button.
If the machine does not drain, check the drainage hose for blockages and ensure it is not kinked. Also, inspect the pump filter for debris and clean it if necessary.
To clean the detergent drawer, pull it out until it stops, then press the release lever to remove it completely. Rinse it under warm water and use a brush to remove any residue.
Regularly clean the drum, detergent drawer, and door seal. Check and clean the pump filter every few months, and ensure the drainage hose is clear of obstructions.
Excessive vibration can occur if the machine is not level. Adjust the feet at the bottom of the machine to ensure it is stable. Also, check if the laundry load is balanced.
To select a quick wash, turn the program dial to the 'Quick Wash' setting. This option is ideal for lightly soiled clothes that need a quick refresh.
If the door won't open, ensure the cycle has completed and the 'door lock' indicator is off. If the issue persists, unplug the machine for a few minutes and try again.
Run an empty hot wash cycle with a cup of white vinegar or a washing machine cleaner to eliminate odors. Also, leave the door open after each wash to allow the drum to dry.
The maximum load capacity of the Bosch Series 4 WGG04409GB washing machine is 9 kg. Avoid overloading to ensure optimal washing performance.
To adjust the spin speed, select your wash program and then press the 'Spin' button to cycle through the available spin speeds until your desired speed is displayed.