Contents

LU63LCC50, LU63LCC20, DUL63CC20, DUL63CC50, DUL63CC60B, DUL63CC20B, DUL63CC50B, D61LAC1N0B
- Installation instructions
  - : Important safety information
    - Danger of death!
    - Risk of death!
    - Danger of suffocation!
  - Risk of electric shock!
    - Risk of electric shock!
  - Risk of fire!
    - Risk of fire!
  - Risk of injury!
    - Risk of injury!
    - Risk of injury!
    - Risk of injury!
    - General information
      - Exhaust duct
        
        Note
  - Electrical connection
    - : Risk of electric shock!
    - Installation preparation
      - Caution!
  - Checking the wall
  - Appliance dimensions and safety clearances
  - Preparing the appliance
    - Installing the appliance on a wall unit
      - 1. Use the drill jig or the hole pattern to mark out where the holes are to be drilled. (Fig. 1)
      - 2. If necessary, cut out the opening for the exhaust air pipe in the correct position in the upper cabinet for air extraction mode.
      - 3. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
      - 4. Position the extractor hood below the base plate of the upper cabinet.
      - 5. Use four screws to secure the appliance to the base plate of the upper cabinet from above.
    - Installing the appliance on a wall
      - Caution!
        
        1. Use the drill jig or the hole pattern to drill the holes. (Fig. 1)
        
        2. Press in the wall plugs flush with the wall.
        
        3. Screw on the angle bracket.
        
        4. If necessary, cut out the opening for the exhaust air pipe in the correct position in the wall-hanging cupboard for air extraction mode.
        
        5. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
        
        6. Fit the appliance.
        
        7. Remove the metal grease filter; see the instruction manual.
        
        8. Unscrew the lighting panel. (Fig. 3)
        
        9. Align the appliance horizontally using the two screws. (Fig. 4)
        
        10. Screw the safety bracket securely to the wall over the appliance. This will ensure that the appliance cannot slip out of the bracket and fall if it is unintentionally hit from below. (Fig. 5)
    - Connecting the appliance to the power supply
      - Establishing the connection for the air extraction
      - Notes
        
        1. If necessary, swap the exhaust connection and blind plug.
        
        2. Attach the exhaust air pipe directly to the exhaust connection.
        
        3. Connect it to the air extraction opening.
        
        4. Seal the joints appropriately.
      - Establishing the connection for the circulated air
        
        1. Remove the metal grease filter; see the instruction manual.
        
        2. Use the lever on the extractor hood to select the circulating-air operating mode (Fig. 6).
    - Removing the appliance
      - 1. Disconnect the appliance from the power supply.
      - 2. Loosen the exhaust-air lines.
      - 3. If necessary, loosen the screw connections with the unit.
      - 4. Remove the appliance.

Bosch Series 4 DUL63CC50B Installation Instructions

Bosch Series 4 DUL63CC50B Hood manual cover

Pages 8

Year 0

Language(s)

of 8

Installation Instructions

8 pages

Energy Label

1 pages

Bosch Series 4 DUL63CC50B Hood Specification

The Bosch Series 4 DUL63CC50B Hood is a modern, efficient appliance designed to enhance kitchen environments with its sleek appearance and high-performance functionality. This under-cabinet hood features a powerful extraction rate of up to 350 m³/h, effectively removing smoke, odors, and grease from the air to maintain a fresh kitchen atmosphere. Equipped with a 3-speed fan, the hood offers adjustable ventilation levels to suit various cooking needs, ensuring optimal air quality control.

The hood operates at a noise level of 72 dB, balancing performance with a relatively quiet operation. It incorporates two LED lights, providing bright and energy-efficient illumination of the cooking area, which enhances visibility and safety while preparing meals. The Bosch Series 4 DUL63CC50B Hood is designed for ducted or recirculating installation, offering flexibility based on kitchen configuration and user preference. For recirculating setup, an additional carbon filter kit is required to effectively neutralize odors.

Its push-button control panel ensures ease of use, allowing for quick and simple adjustments to fan speeds and lighting. Constructed with a contemporary brushed steel finish, the hood complements various kitchen styles and is easy to clean. The hood's filters are dishwasher-safe, promoting convenient maintenance and prolonged efficiency. The Bosch Series 4 DUL63CC50B is not only functional but also aesthetically pleasing, offering a reliable solution for modern kitchens that demand both style and substance.

Bosch Series 4 DUL63CC50B Hood F.A.Q.

How do I install the Bosch Series 4 DUL63CC50B Hood?

To install the Bosch Series 4 DUL63CC50B Hood, first ensure you have all the necessary tools, including a drill, screwdriver, and measuring tape. Follow the installation manual provided with the hood, ensuring the correct height and secure mounting to the wall. It's recommended to have a professional handle the electrical connections.

What should I do if the hood is not extracting air effectively?

Check if the filters are clean and properly installed. Ensure that the ducting is not blocked or kinked. Verify that the fan is running correctly and increase the extraction speed if necessary.

How often should I clean the filters on the Bosch Series 4 DUL63CC50B Hood?

Metal grease filters should be cleaned every 2-3 months, depending on usage. They can be washed by hand or in a dishwasher. Ensure they are completely dry before reinstallation.

What type of lighting is used in the Bosch Series 4 DUL63CC50B Hood, and how do I replace it?

The hood uses LED lighting. To replace a bulb, ensure the hood is off and cool, then remove the cover and replace the LED module with a compatible one following the manufacturer's instructions.

How can I switch between recirculation and extraction modes?

The hood is configured for ducted extraction by default. To switch to recirculation mode, install a charcoal filter and make sure the air is redirected back into the kitchen. Follow the instructions in the user manual.

What should I do if the hood's fan does not turn on?

Check that the hood is plugged in and the circuit breaker is not tripped. Ensure the power switch is on and try resetting the hood by turning it off and on again. If the problem persists, consult a professional technician.

How do I maintain the stainless steel finish of the Bosch Series 4 DUL63CC50B Hood?

Clean the stainless steel surface regularly using a damp cloth and a mild detergent. Avoid abrasive cleaners, and always dry the surface after cleaning to prevent water marks.

Why is there a vibration noise coming from the hood?

Ensure the hood is securely mounted and check for any loose screws. Inspect the fan and motor for any obstructions or damage. Balancing the fan blades might also help reduce vibration.

Can I use the hood while cooking on high heat?

Yes, the hood is designed to handle steam and grease from cooking. However, ensure proper ventilation and use the appropriate extraction speed to manage the air effectively.

What is the best way to clean the control panel of the hood?

Use a soft, damp cloth with a mild detergent to clean the control panel. Avoid using excessive water or abrasive materials that could damage the controls.