Contents

Montageanleitung
- Sicherheitshinweise
- Vor dem Einbau
- Vorbereitung des Kchenmbels (Abb. 1-2)
- Einbau des Gerts (Abb. 3)
  - Hinweis
    - 1. Entnehmen Sie die Klammern dem Zubehrbeutel und schrauben Sie sie in der angegebenen Postition an, so dass sie sich frei drehen.
  - 2. Fgen Sie das Kochfeld mittig ein.
  - 3. Drehen Sie die Klammern und ziehen Sie diese fest an.
- Ausbau des Kochfeldes
- Gasanschluss (Abb. 4)
  - : Gasaustrittsgefahr!
- Elektrischer Anschluss (Abb. 5)
- Umstellung auf eine andere Gasart
  - A) Austausch der Dsen (Abb. 6):
    - 1. Nehmen Sie die Roste, Brennerdeckel und Verteiler ab.
    - 2. Tauschen Sie die Dsen mit dem ber unseren Kundendienst erhltlichen Schlssel mit der Artikelnummer 340847 aus (fr Doppelbrenner und Dreiflammenbrenner Artikelnummer 340808), siehe Abb. 9. Achten Sie dabei besonders darauf, dass die Dse ...
      - 3. Bringen Sie die Verteiler und Brennerdeckel auf den entsprechenden Kochstellen an. Setzen Sie auerdem die Roste korrekt ein.
  - B) Einstellung der Gashhne (Abb. 7):
    - 1. Bedienknebel auf kleinste Stufe stellen.
    - 2. Bedienknebel von den Gashhnen abnehmen. Es erscheint ein flexibler Gummidichtring. Mit der Spitze des Schraubendrehers auf die Einstellschraube des Gashahns drcken.
    - 3. Stellen Sie die minimale Gaszufuhr ein, indem Sie die Bypass-Schraube mit einem Schlitzschraubenzieher drehen.
      - 1. Nehmen Sie alle Roste, Brennerdeckel, Verteiler und Bedienknebel ab.
      - 2. Lockern Sie die Brenner-Schrauben.
      - 3. Fr den Wiedereinbau des Gerts folgen Sie den Ausbauanweisungen in umgekehrter Reihenfolge.
- (. 1-2)
- (. 3)
  - - 1. , ...
  - 2. .
  - 3. .
- (. 4)
  - : !
- (. 5)
- - A) (. 6):
    - 1. , .
    - 2. 340847 ( ...
      - 3. . .
  - B) (. 7):
    - 1. .
    - 2. . . ...
    - 3. bypass .
      - 1. , , .
      - 2. .
      - 3. .
      - Safety precautions
- Before installing
- Preparation of the kitchen unit (fig. 1-2)
- Installation of appliance (fig. 3)
  - Note
    - 1. Remove the clips from the accessory bag and screw them into the position indicated so that they can turn freely.
  - 2. Insert and centre the hob.
  - 3. Turn the clips and tighten them fully.
- Removal of hob
- Gas connection (fig. 4)
  - : Danger of leaks!
- Electric connection (fig. 5)
- Changing the gas type
  - A) Changing the nozzles (fig. 6):
    - 1. Remove the pan supports, burner caps and diffusers.
    - 2. Change the nozzles using the spanner code 340847 (code 340808 for double-flame burners or triple-flame burners) provided by our Technical Assistance Service, see fig. 9, taking special care to ensure that the nozzle does not fall when it is remove...
      - 3. Position the diffusers and burner caps on the corresponding rings. The pan supports must also be positioned correctly.
  - B) Adjusting the gas valves (fig. 7):
    - 1. Turn the control knobs to the lowest setting.
    - 2. Remove the control knobs from the gas valves. A flexible rubber sealing ring will be visible. Push down with the tip of a screwdriver on the gas valve's setting screw.
    - 3. Adjust the minimum ring setting by turning the by-pass screw using a flat head screwdriver.
      - 1. Remove all pan supports, burner caps, diffusers and control knobs.
      - 2. Remove the screws from the burners.
      - 3. To reinstall the appliance, proceed in the reverse order to disassembly.
      - Indicaciones de seguridad
- Antes de la instalacin
- Preparacin del mueble (fig. 1-2)
- Instalacin del aparato (fig. 3)
  - Nota
    - 1. Saque las grapas de la bolsa de accesorios y atornllelas en la posicin indicada dejando que giren libremente.
  - 2. Encastre y centre la placa de coccin.
  - 3. Gire las grapas y apritelas a fondo.
- Desmontaje de la placa de coccin
- Conexin de gas (fig. 4)
  - : Peligro de fuga!
- Conexin elctrica (fig. 5)
- Cambio del tipo de gas
  - A) Cambio de inyectores (fig. 6):
    - 1. Retire las parrillas, tapas de quemador y difusores.
    - 2. Cambie los inyectores usando la llave disponible a travs de nuestro servicio tcnico con cdigo 340847 (para quemadores de doble o triple llama cdigo 340808), ver fig. 9, teniendo especial cuidado en que no se desprenda el inyector al retira...
      - 3. Coloque los difusores y las tapas de los quemadores en sus correspondientes fuegos. Adems deber colocar adecuadamente las parrillas.
  - B) Reglaje de los grifos (fig. 7):
    - 1. Coloque los mandos en la posicin de mnimo.
    - 2. Retire los mandos de los grifos. Se encontrar con un retn de goma flexible. Presione con la punta del destornillador para acceder al tornillo de regulacin del grifo.
    - 3. Regule el fuego mnimo girando el tornillo bypass mediante un destornillador de punta plana.
      - 1. Quite todas las parrillas, tapas de los quemadores, difusores y mandos.
      - 2. Suelte los tornillos de los quemadores.
      - 3. Para volver a montar el aparato proceda de modo inverso al desmontaje.
      - Indications de scurit
- Avant l'installation
- Prparation du meuble (fig.1-2)
- Installation de l'appareil (fig. 3)
  - Remarque
    - 1. Sortez les agrafes de la poche des accessoires et vissez-les dans la position indique en les laissant tourner librement.
  - 2. Encastrez et centrez la plaque de cuisson.
  - 3. Tournez les agrafes et serrez-les fond.
- Dmontage de la plaque de cuisson
- Branchement de gaz (fig. 4)
  - : Risque de fuites !
- Branchement lectrique (fig. 5)
- Changement du type de gaz
  - A) Changement des injecteurs (fig. 6):
    - 1. Retirez les grilles, les couvercles de brleur et les diffuseurs.
    - 2. Changez les injecteurs en utilisant la cl disponible (rf. 340847) auprs de notre Service technique (pour brleurs double ou triple flamme, rf. 340808), voir fig. 9, en faisant particulirement attention ne pas dloger l'injecteur en ...
      - 3. Placez les diffuseurs et les couvercles des brleurs sur leurs feux correspondants. Il faudra galement placer adquatement les grilles.
  - B) Rglage du robinet de gaz (fig. 7) :
    - 1. Rglez la manette de commande sur la position la plus petite.
    - 2. Retirez la manette de commande des robinets de gaz. Une bague d'tanchit en caoutchouc apparat. Appuyez avec la pointe du tournevis pour accder la vis de rglage du robinet de gaz.
    - 3. Rglez le feu minimum en tournant la vis by-pass l'aide d'un tournevis pointe plate.
      - 1. tez tous les grilles, couvercles des brleurs, diffuseurs et boutons de commande.
      - 2. Desserrez les vis des brleurs.
      - 3. Pour remonter l'appareil, suivez la procdure inverse au dmontage.
      - Indicazioni di sicurezza
- Prima dell'installazione
- Preparazione del mobile (fig. 1-2)
- Installazione dell'apparecchio (fig. 3)
  - Avvertenza
    - 1. Estrarre le graffe dal sacchetto degli accessori e avvitarle nella posizione indicata lasciando che girino liberamente.
  - 2. Incassare e centrare il piano di cottura.
  - 3. Girare le graffe e stringerle a fondo.
- Smontaggio del piano di cottura
- Attacco del gas (fig. 4)
  - : Pericolo di fughe!
- Connessione elettrica (fig. 5)
- Cambio del tipo di gas
  - A) Sostituzione degli iniettori (fig. 6):
    - 1. Rimuovere le griglie, i coperchi del bruciatore e i diffusori.
    - 2. Sostituire gli iniettori usando la chiave disponibile presso il nostro Servizio Tecnico, codice 340847 (340808 per i bruciatori a doppia o tripla fiamma); vedere figura 9, facendo particolare attenzione che l'iniettore non si distacchi quando tolt...
      - 3. Collocare i diffusori e i coperchi dei bruciatori sui corrispondenti fuochi. Sistemare correttamente le griglie.
  - B) Impostazione delle valvole del gas (fig. 7):
    - 1. Portare la manopola di comando sul livello pi basso.
    - 2. Rimuovere le manopole di comando dalle valvole del gas. Compare una tenuta di gomma flessibile. Premere con la punta del cacciavite per accedere alla vite di regolazione della valvola del gas.
    - 3. Regolare il fuoco minimo girando la vite di by-pass con un cacciavite a punta piatta.
      - 1. Togliere tutte le griglie, i coperchi dei bruciatori, i diffusori e le manopole.
      - 2. Rimuovere le viti dei bruciatori.
      - 3. Per rimontare l'apparecchio, invertire la procedura di smontaggio.
      - Installatievoorschrift
        
        Veiligheidsaanwijzingen
- Vr de installatie
- Voorbereiding van het meubel (afb. 1-2)
- Installatie van het apparaat (afb. 3)
  - Aanwijzing
    - 1. Haal de klemmen uit de zak met accessoires en schroef deze vast in de aangeduide stand, zorg dat deze vrij draaien.
  - 2. Bouw de kookplaat in en centreer deze.
  - 3. Draai de klemmen helemaal aan.
- Uitbouw van de kookplaat
- Gasaansluiting (fig. 4)
  - : Lekgevaar!
- Elektrische aansluiting (fig. 5)
- Verandering van gastype
  - A) Vervangen van de inspuiters (afb. 6):
    - 1. Verwijder de roosters, hoedjes en verspreiders.
    - 2. Vervang de inspuiters met de sleutel die beschikbaar is via onze technische dienst, met code 340847 (voor branders met dubbele of driedubbele vlam code 340808), zie Afb. 9. Zorg dat de inspuiter niet losraakt bij het verwijderen of bevestigen hier...
      - 3. Plaats de verspreiders en de hoedjes op de overeenstemmende pitten. De roosters moeten bovendien naar behoren geplaatst worden.
  - B) Instelling van de gaskranen (Afb. 7):
    - 1. Bedieningsknop in de kleinste stand zetten.
    - 2. Bedieningsknop van de gaskranen afnemen. Er verschijnt een flexibele rubberen afdichtingsring. Met de punt van de schroevendraaier op de instelschroef van de gaskraan drukken.
    - 3. Stel de minimumstand af door de bypass bout te draaien met een schroevendraaier met een vlakke punt.
      - 1. Verwijder alle roosters, hoedjes, verspreiders en knoppen.
      - 2. Maak de bouten van de branders los.
      - 3. Ga, om het apparaat terug in te bouwen, op omgekeerde wijze te werk dan bij de demontage.
      - Wskazwki dotyczce bezpieczestwa
- Przed zainstalowaniem
- Przygotowanie mebla (rys. 1-2)
- Instalacja urzdzenia (rys. 3)
  - Wskazwka
    - 1. Wyj uchwyty z torebki z akcesoriami i przykrci we wskazanym pooeniu, tak by mogy swobodnie si obraca.
  - 2. Wsun pyt kuchenki i ustawi centralnie w wyciciu mebla.
  - 3. Obrci uchwyty i docisn je do koca.
- Demonta pyty kuchenki
- Podczanie gazu (rys. 4)
  - : Niebezpieczestwo ulatniania si gazu!
- Podczanie prdu (rys. 5)
- Zmiana rodzaju gazu
  - A) Wymiana dyszy (Rys. 6):
    - 1. Zdj ruszty, nakadki palnika i dyfuzory.
    - 2. Wymieni dysze za pomoc klucza dostpnego w naszym Serwisie Technicznym (kod produktu 340847, natomiast w przypadku palnikw o podwjnym lub potrjnym wiecu pomieni - kod produktu 340808), patrz rys. 9, zwracajc szczegln uwag na...
      - 3. Zaoy dyfuzory i nakadki palnikw na odpowiednich palnikach. Ponadto naley prawidowo zaoy ruszty.
  - B) Ustawianie kurkw gazowych (rys. 7):
    - 1. Ustawi pokrta obsugi na najmniejszy stopie.
    - 2. Zdj pokrta obsugi z kurkw gazowych. Pojawi si elastyczny gumowy piercie uszczelniajcy. Czubkiem rubokrta nacisn rub regulacyjn kurka gazowego.
    - 3. Wyregulowa pomie minimalny, obracajc rub zczki przejciowej za pomoc rubokrtu z pask kocwk.
      - 1. Zdj wszystkie ruszty, nakadki z palnikw, dyfuzory oraz wyj pokrta.
      - 2. Wykrci ruby z palnikw.
      - 3. W celu ponownego zamontowania formy na tuszcz, naley wykona czynnoci demontau w odwrotnej kolejnoci:
      - Instrues de montagem
        
        Indicaes de segurana
- Antes da instalao
- Preparao do mvel (fig. 1-2)
- Instalao do aparelho (fig. 3)
  - Nota
    - 1. Retire os grampos do conjunto de acessrios e aparafuse-os na posio indicada, deixando que estes rodem livremente.
  - 2. Encastre e centre a placa de cozedura.
  - 3. Gire os grampos e aperte-os bem.
- Desmontagem da placa de cozedura
- Ligao a gs (fig. 4)
  - : Perigo de fuga!
- Ligao elctrica (fig. 5)
- Mudana do tipo de gs
  - A) Substituio dos injectores (fig. 6):
    - 1. Retire as grelhas, as tampas de queimador e os difusores.
    - 2. Substitua os injectores usando a chave disponibilizada pelo nosso servio de assistncia tcnica, com o cdigo 340847 (para queimadores de chama dupla ou tripla, cdigo 340808) (ver fig. 9), tendo especial ateno para que o injector no s...
      - 3. Coloque os difusores e as tampas dos queimadores nos respectivos lugares. Alm disso, deve colocar adequadamente as grelhas.
  - B) Regulao das torneiras de gs (fig. 7):
    - 1. Coloque os comandos no nvel mais baixo.
    - 2. Retire os comandos das torneiras de gs. Surge um anel de vedao em borracha flexvel. Com a ponta da chave de parafusos, pressione o parafuso de ajuste da torneira de gs.
    - 3. Regule a chama mnima rodando o parafuso bypass atravs de uma chave de fendas de ponta plana.
      - 1. Remova todas as grelhas, tampas dos queimadores, difusores e comandos.
      - 2. Desaperte os parafusos dos queimadores.
      - 3. Para voltar a montar o aparelho, proceda de modo inverso ao da desmontagem
- (. 1-2)
- (. 3)
  - - 1. , .
  - 2. .
  - 3. .
- (. 4)
  - : !
- (. 5)
- - A) (. 6):
    - 1. , .
    - 2. , , 340847 ( ...
      - 3. . .
  - B) (. 7):
    - 1. .
    - 2. . . ...
    - 3. , .
      - 1. , , .
      - 2. .
      - 3. , .

Bosch Series 2 PBH6B5B60 Installation Instructions

Bosch Series 2 PBH6B5B60 Hob manual cover

Pages 16

Year 0

Language(s)

of 16

Bosch Series 2 PBH6B5B60 Hob Specification

The Bosch Series 2 PBH6B5B60 Hob is a high-quality cooking appliance designed for efficient performance and ease of use. It features a sleek stainless steel finish that complements modern kitchen aesthetics while ensuring durability. The hob is equipped with four gas burners, including one high-speed burner, two standard burners, and one economy burner, providing flexibility for various cooking needs. The dimensions of the hob are 58.0 cm x 51.0 cm, making it suitable for integration into most kitchen countertops.

Each burner is controlled by an easy-to-use knob, which allows precise regulation of the flame intensity. The hob includes flame failure safety devices on all burners, which automatically cut off the gas supply if the flame is extinguished, ensuring enhanced safety. The cast iron pan supports are robust and stable, providing secure support for pots and pans during cooking.

The Bosch PBH6B5B60 is compatible with both natural gas and LPG, offering versatility in energy sources. The hob also features an electronic ignition system, eliminating the need for matches or lighters and ensuring convenient operation.

With its efficient design and reliable performance, the Bosch Series 2 PBH6B5B60 Hob is ideal for users seeking a functional and stylish addition to their kitchen that meets everyday cooking demands. Its combination of safety features, robust construction, and adaptable cooking options makes it a practical and attractive choice for home chefs.

Bosch Series 2 PBH6B5B60 Hob F.A.Q.

How do I ignite the burners on my Bosch Series 2 PBH6B5B60 Hob?

To ignite the burners, press the control knob for the desired burner and turn it counterclockwise to the ignition symbol. Hold the knob down to activate the spark ignition system until the flame is lit.

What should I do if the burner does not ignite?

Ensure that the hob is connected to the power supply and that the gas supply is on. Check that the burner cap and crown are in their correct positions. Clean any debris that may be blocking the igniter or burner holes.

How can I clean the burners and pan supports effectively?

Remove the pan supports and burner parts once they have cooled down. Soak them in warm soapy water, then scrub gently with a non-abrasive brush. Rinse thoroughly and dry before reassembling.

What maintenance is required for the Bosch Series 2 PBH6B5B60 Hob?

Regular cleaning of the hob surface, burners, and pan supports is essential. Inspect the gas connection and igniter regularly for damage or wear. Ensure the control knobs function smoothly.

How do I adjust the flame size on the Bosch Series 2 Hob?

Turn the control knob to adjust the flame size. Turn it counterclockwise to increase the flame and clockwise to decrease it. Ensure the flame remains stable and blue for efficient cooking.

What should I do if the flame is uneven or yellow?

Check for obstructions in the burner ports and clean them if necessary. Ensure the burner parts are correctly assembled. If the issue persists, contact a qualified technician to check the gas supply and pressure.

Can I use cast iron pans on the Bosch Series 2 PBH6B5B60 Hob?

Yes, cast iron pans can be used, but ensure they are not too heavy and are lifted rather than slid to prevent scratching the hob surface.

What safety features does the Bosch Series 2 PBH6B5B60 Hob have?

The hob includes a flame failure safety device that cuts off the gas supply if the flame is accidentally extinguished, preventing gas leaks.

How do I ensure the hob is energy efficient?

Use pots and pans that match the size of the burner and have flat bases. Cover pots with lids to retain heat and reduce cooking time. Adjust the flame to prevent it from extending beyond the pot base.

Why does the igniter keep clicking even after the burner is lit?

This may be due to moisture around the igniter. Dry the area thoroughly. If the problem persists, there may be a fault with the igniter or control knob. Consult a technician for further assistance.