Contents

DWP64CC59M, DWP64CC.0T, DWP64CC50M, DWP64CC50Q, DWP64CC50Z, DWP64CC60Z, DWP64CC20Z, DWP94CC50T, DWP94CC50M, LC64PCC50T, LC64PCC60T, LC64PCC20T, LC64PCC50M, LC64PCC50Z, LC64PCC60Z, LC94PCC50T, LC94PCC50M, DVP6C450, DVP6C460, DVP6C420, DVP9C450, DWP64C...
- Installation instructions
  - : Important safety information
    - Danger of death!
    - Risk of death!
    - Danger of suffocation!
    - Risk of electric shock!
    - Risk of fire!
      - Risk of fire!
    - Risk of injury!
      - Risk of injury!
      - Risk of injury!
  - General information
    - Exhaust air mode
    - Note
    - Exhaust duct
    - Note
    - Circulating-air mode
    - Note
    - Electrical connection
    - : Risk of electric shock!
  - Preparing for installation
    - Checking the wall
      - Appliance dimensions and safety clearances
      - Preparing the wall
      - Caution!
        
        1. Mark a vertical centre line on the wall from the ceiling to the lower edge of the extractor hood. (Fig. 1)
        
        2. Mark holes for the angle brackets in the chimney. The centre of the angle bracket is marked with a notch. Place the angle brackets in the middle of the centre line, align them horizontally and mark the positions of the holes. The distance X betwee...
        
        3. Mark holes for the appliance's mounting brackets.
        
        4. Drill the holes.
        
        5. Press in the wall plugs flush with the wall.
      - Fitting the wall bracket
        
        1. Screw on the fixing bracket for the flue duct. (Fig. 1)
        
        2. Screw in the screws for the appliance bracket loosely; do not tighten them fully. (Fig. 1)
      - Preparing the appliance
        
        1. Take hold of the filter cover with two hands and open it.
        
        2. Remove the metal grease filter.
  - Installing the appliance
    - : Risk of injury!
    - : Risk of injury!
    - Attaching and aligning the appliance
    - : Risk of injury!
      - 1. First remove the protective film from the back of the appliance and, following installation, remove the rest of the film.
      - 2. Hang the appliance on the wall. (Fig. 2)
      - 3. Make the appliance level. (Fig. 3)
      - 4. Screw in the screws for the appliance bracket fully. (Fig. 4)
      - 5. Remove the protective film from the metal grease filters.
      - 6. Fit the metal grease filter.
  - Connecting the appliance
    - Connecting the air extractor and establishing a connection to the mains
      - Notes
      - Connecting the exhaust air pipe
      - Note
        
        1. Attach the exhaust air pipe directly to the air pipe connector.
        
        2. Connect it to the exhaust air opening.
        
        3. Use suitable means to seal the joints.
      - Connecting the power supply
        
        1. Plug the mains plug into the earthed socket.
        
        2. If a fixed connection is required, follow the instructions in the Electrical connection section.
  - Attaching the flue duct
    - : Risk of injury!
      - 1. Remove the pieces of protective film from both flue duct sections.
      - 2. Fit the upper flue duct section. Gently push the two side panels of the upper flue duct section apart, hook them in behind the angle brackets and then push them back together as far as they will go. (Fig. 5a)
      - Note
        
        3. Screw the upper flue duct section to the ends of both angle brackets. (Fig. 5b)
        
        4. Fit the lower flue duct section. Gently push the two side panels of the lower flue duct section apart and hook them in behind the upper flue duct section.
      - Note
        
        5. Push the two side panels of the lower flue duct section back together as far as they will go.
  - Removing the appliance
    - 1. Disconnect the appliance from the power supply.
    - 2. Remove the flue duct.
    - 3. Loosen the exhaust air lines.
    - 4. Remove the metal grease filter.
    - 5. Unscrew in the screws for the appliance bracket slightly; do not loosen them fully.
    - 6. Remove the appliance.
    - 7. Remove the angle bracket for the flue duct.

Bosch Series 2 DWP64CC50M Installation Instructions

Bosch Series 2 DWP64CC50M Hood manual cover

Pages 8

Year 0

Language(s)

of 8

Installation Instructions

8 pages

Energy Label

1 pages

Bosch Series 2 DWP64CC50M Hood Specification

The Bosch Series 2 DWP64CC50M Hood is a reliable and efficient kitchen ventilation solution, designed to maintain a clean and odor-free cooking environment. This wall-mounted chimney hood features a sleek, modern design that integrates seamlessly into various kitchen décors. It is equipped with a powerful motor that ensures efficient extraction, offering a maximum extraction rate of up to 360 m³/h. This capability effectively removes smoke, steam, and cooking odors, enhancing air quality during meal preparation.

The DWP64CC50M features three speed settings, allowing users to adjust the ventilation power according to their cooking needs. The operation is managed through easy-to-use, front-mounted controls, providing convenient access to all functionalities. For enhanced visibility and safety while cooking, the hood is fitted with two energy-efficient LED lights, which illuminate the cooking area with clear, bright light.

The unit includes a durable aluminum grease filter, designed to trap airborne grease particles, thus protecting the motor and prolonging the hood's lifespan. The filter is removable and dishwasher-safe, ensuring hassle-free maintenance and consistent performance. The hood offers both ducted and recirculating installation options, providing flexibility to accommodate different kitchen layouts and ventilation systems.

With its combination of functional design, robust performance, and energy efficiency, the Bosch Series 2 DWP64CC50M Hood is an ideal choice for homeowners seeking a dependable and stylish kitchen ventilation appliance. Its efficient operation and straightforward maintenance make it a practical addition to any modern kitchen, ensuring a pleasant cooking experience.

Bosch Series 2 DWP64CC50M Hood F.A.Q.

How do I properly install the Bosch Series 2 DWP64CC50M hood?

Ensure the hood is mounted to a secure wall or cabinet. Use the provided mounting template for accurate placement. Connect the power supply following safety guidelines.

What is the best way to clean the filters of the Bosch Series 2 DWP64CC50M hood?

Remove the aluminum filters and wash them in warm soapy water or in a dishwasher. Ensure they are completely dry before reinstalling.

How can I troubleshoot if the hood is not extracting properly?

Check if the filters are clean and not clogged. Ensure the ducting is not blocked and that the installation is correct.

What should I do if the hood lights are not working?

Check the light bulb and replace it if necessary. Also, ensure the power connection is secure and the switch is functioning properly.

How often should I perform maintenance on the DWP64CC50M hood?

Clean the filters every 2-3 months depending on usage. Check and replace the light bulbs as needed and inspect the ductwork annually.

What is the recommended distance between the cooktop and the Bosch Series 2 DWP64CC50M hood?

Maintain a minimum distance of 65 cm from electric cooktops and 75 cm from gas cooktops for optimal performance.

How do I replace the light bulb in the DWP64CC50M hood?

Turn off the hood and unplug it. Remove the light cover, replace the bulb with a compatible one, and reattach the cover securely.

Why is my Bosch Series 2 DWP64CC50M hood making unusual noises?

Noises may occur due to loose parts or obstructions in the fan or duct. Check and tighten any loose components and ensure the ducting is clear.

Can the Bosch Series 2 DWP64CC50M hood be converted to recirculation mode?

Yes, the hood can be converted to recirculation mode using a carbon filter kit. Follow the manufacturer's instructions for installation.

How do I reset the filter clean indicator on the Bosch Series 2 DWP64CC50M?

After cleaning the filters, press and hold the reset button on the control panel for a few seconds until the indicator light turns off.