Bosch Series 2 DWP64BC50B Installation Instructions
![Bosch Series 2 DWP64BC50B Hood manual cover](/images/ASarZfMjNgKJZhNfwMjjcgGs/thumbs/thumb175x175.webp)
Ensure the hood is securely mounted to the wall or cabinet. Follow the installation guide for proper positioning and use the correct screws and anchors for your wall type. Ensure electrical connections are safely made by a qualified electrician.
Remove the metal grease filters and soak them in hot, soapy water. Alternatively, you can clean them in a dishwasher. Ensure they are completely dry before reinstalling.
Check for obstructions in the fan or ductwork. Ensure all installation screws and components are tightly secured. If noise persists, contact customer service for further assistance.
Ensure the ducting is not obstructed and is as straight as possible. Clean the filters regularly and avoid using the hood in recirculation mode if ducting is available.
Check the bulb and replace it if necessary. Ensure the electrical connections are secure. If the problem persists, there may be an issue with the wiring or circuit board.
Charcoal filters should be replaced every 3 to 6 months depending on usage to maintain optimal performance.
Use rigid ducting for the best performance. If flexible ducting is necessary, keep it as straight and short as possible to reduce efficiency loss.
Yes, but ensure the minimum installation height above the cooktop is maintained as per the installation manual to ensure effective extraction and safety.
Press and hold the filter reset button until the indicator light goes out, indicating the reset is complete.
The maximum noise level is approximately 64 dB at the highest setting.