BenQ XL Series User Manual
en
XL Series User Manual
2
Copyright
Copyright 2016 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality, unstable power supply, signal interference, or poor grounding, and not limited to the above mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
The AC plug isolates this equipment from the AC supply.
The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible.
This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company.
An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must be used.
Care And Cleaning
Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.
Never push objects or spill liquid of any kind into this product.
Please follow these safety instructions for best performance, and long life for your monitor.
3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing.
4
Table of Contents Copyright ......................................................................................................................................2 Disclaimer .....................................................................................................................................2 Power Safety .................................................................................................................................2 Getting started .............................................................................................................................6 Getting to know your monitor ................................................................................................8
Front view.................................................................................................................................................... 8 Back view ..................................................................................................................................................... 8
How to assemble your monitor hardware ...........................................................................9 How to detach the stand base .............................................................................................................. 13 Adjusting the monitor height ................................................................................................................ 14 Rotating the monitor .............................................................................................................................. 16 Viewing angle adjustment ....................................................................................................................... 17 Using the monitor wall mounting kit ................................................................................................... 18
Getting the most from your BenQ monitor ...................................................................... 19 How to install the monitor on a new computer .............................................................................. 20 How to upgrade the monitor on an existing computer ................................................................. 21 How to install on Windows 10 system (selected models only) ................................................... 22 How to install on Windows 8 system ................................................................................................ 23 How to install on Windows 7 system ................................................................................................ 24 How to watch 3D content on your monitor .................................................................................... 25
How to adjust your monitor ................................................................................................. 26 The control panel..................................................................................................................................... 26 Basic menu operation.............................................................................................................................. 27 Controlling the display with Display Pilot (selected models only) ............................................... 28 Initial setup for playing games ............................................................................................................... 29 Picture optimization ................................................................................................................................ 31 Customizing the hot keys....................................................................................................................... 31 Setting up your own game mode ......................................................................................................... 31 Downloading more game modes using Game Mode Loader ........................................................ 32 Adjusting display mode ........................................................................................................................... 32 Using Smart Scaling.................................................................................................................................. 32 Using Instant Mode .................................................................................................................................. 33
Navigating the main menu ...................................................................................................... 34 Display menu ............................................................................................................................................. 35 Picture menu ............................................................................................................................................. 37 Picture Advanced menu ......................................................................................................................... 40 Save Settings menu .................................................................................................................................. 44 Audio menu ............................................................................................................................................... 45 System menu ............................................................................................................................................. 46
Troubleshooting ....................................................................................................................... 50 Frequently asked questions (FAQ) ...................................................................................................... 50
5
Need more help? ...................................................................................................................................... 52
6 Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Base
Quick Start Guide
CD-ROM
Power Cord (Picture may differ from product supplied for your region.)
Video Cable: D-Sub
Video Cable: DVI-D Dual Link
7 Getting started
Video Cable: HDMI (Optional accessory)
Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. For cables that are not supplied with your product, you can purchase them separately.
Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children.
8 Getting to know your monitor
Getting to know your monitor
Front view
Back view
1. Control buttons
2. Power button
1 2
3. AC Power Input jack
4. Height release
5. Cable clip
6. D-Sub socket
7. DVI-D socket
8. HDMI socket
9. Kensington lock slot
10. Headphone jack
Above diagram may vary depending on the model.
Picture may differ from product supplied for your region.
3 4 5 6 7 8 9 10
9 How to assemble your monitor hardware
How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded surface.
While holding the monitor firmly against the desk, pull the monitor stand arm upwards clear of the monitor.
Orient and align the stand base socket with the end of the stand arm, then push them together. Tighten the thumbscrew on the bottom of the monitor base as illustrated.
Gently attempt to pull them back apart to check that they have properly engaged.
1 2
10 How to assemble your monitor hardware
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Extend the stand to the maximum extended position. And rotate the monitor 90 degrees counterclockwise as illustrated.
You might want to adjust the monitor stand height. See Adjusting the monitor height on page 14 for more information.
You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.
-5O~ +20O
11 How to assemble your monitor hardware
2. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device.
If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection. - Better quality: HDMI / DVI-D - Good quality: D-Sub
The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region.
3. Connect the headphones.
You may connect headphones to the headphone jack found on the left side of the monitor.
Either
Or
Or
12 How to assemble your monitor hardware
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled on the rear of the monitor. Do not connect the other end to a power outlet just yet.
5. Route the cables via the cable clip.
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the monitor.
Turn on the computer too, and follow the instructions in Getting the most from your BenQ monitor on page 19 to install the monitor software.
To extend the service life of the product, we recommend that you use your computer's power management function.
13 How to assemble your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk for padding, before laying the screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.
2. Release the thumbscrew on the bottom of the monitor base and detach the monitor base as illustrated. 1
2
14 How to assemble your monitor hardware
Adjusting the monitor height
To extend the monitor stand to a higher position, press the lower part of the height release on the stand while holding the bottom of the monitor at the same time. And pull the stand and the monitor upward together to the desired height.
If the height release in the proceeding operation cannot be pressed down, press the top of the monitor once as illustrated on the right before you proceed.
If you prefer to lower the monitor stand height, push the stand downward while holding both left and right sides of the monitor.
Height release
15 How to assemble your monitor hardware
Avoid placing hands on the upper or lower part of the height-adjustable stand or at the bottom of the monitor, as ascending or descending monitor might cause personal injuries. Keep children out of reach of the monitor while performing this operation.
If the monitor has been rotated to portrait mode and height adjustment is desired, you should be noted that the wide screen will keep the monitor from being lowered to its minimum height.
16 How to assemble your monitor hardware
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90 degrees.
Click to launch the Display Pilot Software (if installed from the CD), and check Auto Pivot to set the display to rotate with the monitor automatically.
Alternatively, right-click the desktop and select Screen resolution from the popup menu. Select Portrait in Orientation, and apply the setting.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend the stand to the maximum extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as illustrated.
To avoid the edge of the LCD display hitting the monitor base surface while it is being rotated, do tilt and extend the monitor to the highest position before you start to rotate the display. You should also make sure there are no obstacles around the monitor and there is enough room for cables.
90
17 How to assemble your monitor hardware
Viewing angle adjustment You may position the screen to the desired angle with -5 to + 20 monitor tilt, 90 (left and right total) monitor swivel, and 130 mm monitor height.
4. Adjust the monitor to the desired viewing angle.
-5O~ +20O
-45O ~ +45O
130 mm
18 How to assemble your monitor hardware
Using the monitor wall mounting kit The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, please read the precautions carefully.
Precautions
Install your monitor and monitor mounting kit on a wall with flat surface.
Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable enough to support the weight of the monitor. Refer to the product specifications for weight information.
Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor stand.
Lay the screen face down on a clean and well-padded surface. Detach the monitor base as instructed in How to detach the stand base on page 13.
2. Remove the monitor stand.
Use a a cross-pointed screwdriver to release the screws that fixing the monitor stand to the monitor. The use of a magnetic-head screwdriver is recommended to avoid of losing the screws.
Then pull the monitor stand backward away from the monitor.
In case you intend to use your monitor on the stand in the future, please keep the monitor base, monitor stand, and screws somewhere safe for future use.
3. Follow the instruction manuals of the wall mount bracket you purchased to complete the installation.
Use four M4 x 10 mm screws to fix a VESA standard wall mount bracket to the monitor. Make sure that all screws are tightened and secured properly. Consult a professional technician or BenQ service for wall mount installation and safety precautions.
19 Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine which process you need to follow to successfully install the BenQ LCD Monitor driver software. These circumstances relate to which version of Microsoft Windows you are using, and whether you are connecting the monitor and installing the software onto a new computer (without existing monitor driver software), or whether you are upgrading an existing installation (which already has existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the monitor to your computer), Windows will automatically recognize the new (or different) hardware, and will launch its Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click the Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor model. Further details and step-by-step instructions for either an automatic (new) or upgrade (existing) installation, see:
How to install the monitor on a new computer on page 20.
How to upgrade the monitor on an existing computer on page 21.
If you require a User Name and Password to login to your Windows computer, you must be logged on as an Administrator or as a member of the Administrators group in order to install the monitor driver software. Furthermore, if your computer is connected to a network which has security access requirements, network policy settings may prevent you from installing software on your computer.
To check the name of the purchased model, refer to the specification label on the back of the monitor.
20 Getting the most from your BenQ monitor
How to install the monitor on a new computer This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver software on a new computer which has never had a monitor driver installed before. This instruction is only suitable for a computer which has never been used before, and for which the BenQ LCD Monitor is the first ever monitor to be connected to it.
1. Follow the instructions inHow to assemble your monitor hardware on page 9. When Windows starts, it will automatically detect the new monitor and launch the Found New Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor and click Next.
6. Click Finish.
7. Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor connected to it (and has monitor driver software installed), you should not be following these instructions. You should instead be following the instructions for How to upgrade the monitor on an existing computer.
To find the suitable driver files for the purchased mode, refer to the following table.
Driver files Suitable models
XL2411T XL2411T / XL2411TE
XL2411Z XL2411Z / XL2411ZE
XL2411 XL2411 / XL2411E
21 Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer This instruction details the procedure for manually updating the existing monitor driver software on your Microsoft Windows computer. It is currently tested as compatible for Windows 10, Windows 8, and Windows 7 Operating System (OS).
Installing monitor driver software involves selecting an appropriate information file (.inf) on the BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting Windows install the corresponding driver files from the CD. You need only steer it in the right direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you through the file selection and installation process.
See:
How to install on Windows 10 system (selected models only) on page 22.
How to install on Windows 8 system on page 23.
How to install on Windows 7 system on page 24.
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows and cannot guarantee its operation on those systems.
22 Getting the most from your BenQ monitor
How to install on Windows 10 system (selected models only) 1. Open Display Properties.
Go to Start, Settings, Devices, Devices and Printers and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for driver software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be 'D:' or 'E:' or 'F:' etc.
23 Getting the most from your BenQ monitor
How to install on Windows 8 system 1. Open Display Properties.
Move the cursor to the lower-right of the screen or press the Windows + C buttons on the keyboard to bring up the Charm bar. Go to Settings, Control Panel, Devices and Printers and right-click the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for driver software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be 'D:' or 'E:' or 'F:' etc.
24 Getting the most from your BenQ monitor
How to install on Windows 7 system 1. Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for driver software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be 'D:' or 'E:' or 'F:' etc.
25 Getting the most from your BenQ monitor
How to watch 3D content on your monitor Your monitor supports playing three-dimensional (3D) content transferred through DVI-D Dual Link cable. Yet you need to have the appropriate hardware equipment and software programs that are compatible with 3D playback.
System requirements
BenQ LCD Monitor (XL11 series)
Compatible 3D glasses
PC with Microsoft Windows 8 or Windows 7 Operating System
Compatible graphics processing units (GPU) with the latest driver files installed
Compatible software programs that play 3D playback
For the compatible accessories, visit http://www.nvidia.com/object/3d-vision-requirements.html. For the appropriate 3D players, check with the 3D content providers.
Playing 3D content
Follow the instruction manuals of your 3D accessories to install the hardware and the software.
If you want to adjust the brightness when watching 3D content, go to Picture and NVIDIA 3D LightBoost. See Brightness (during 2D playback) / NVIDIA 3D LightBoost (during 3D playback) on page 37 for more information.
Safety information for watching 3D content
You may experience eye strain after watching 3D content for certain period of time. Take off the 3D glasses and take a rest to relieve the eye strain.
If you experience headaches, dizziness, or nausea, stop watching 3D content immediately. You might need to consult a doctor if the symptoms last.
Watching 3D content for a long period of time may increase health risks. For small children, the elderly, the pregnant women or people who have high blood pressure or other health concerns, consult a doctor before watching 3D content.
Not all menu options are available for 3D playback.
Contact NVIDIA or visit NVIDIA website (http://www.nvidia.com/page/home.html) for the purchase and the settings of the compatible GPU.
Visit the NVIDIA website (www.nvidia.com/3DUpdate) for the latest GPU driver files.
26 How to adjust your monitor
How to adjust your monitor
The control panel All OSD (On Screen Display) menus can be accessed by the control keys.
No. Name Description
1. Control keys Accesses the functions or menu items displayed on the screen, right next to each key.
2. Power key Turns the power on or off.
1 2
27 How to adjust your monitor
Basic menu operation You can use the OSD menu to adjust all the settings on your monitor.
1. Press any of the control keys.
2. The hot key menu is displayed. The left three controls are custom keys and are designated for particular functions.
3. Select Menu to access the main menu.
4. In the main menu, follow the icons next to the control keys to make adjustments or selection. See Navigating the main menu on page 34 for details on the menu options.
1 2
34
No. OSD in hot key
menu
OSD icon in main menu
Function
Custom Key 1 By default, the key is the hot key for Blur Reduction (Motion Blur Reduction). To change the default settings, see Customizing the hot keys on page 31.
For Up/Increase adjustment.
28 How to adjust your monitor
Controlling the display with Display Pilot (selected models only) The provided Display Pilot software on the CD is an alternative to control the display. The main functions include:
Control of the OSD menus.
Access to more game modes through Game Mode Loader.
For more information, visit www.BenQ.com and download the Display Pilot Help file.
Custom Key 2 By default, the key is the hot key for Display Mode. To change the default settings, see Customizing the hot keys on page 31.
For Down/Decrease adjustment.
Custom Key 3 /
By default, the key is the hot key for Smart Scaling. To change the default settings, see Customizing the hot keys on page 31.
Enters sub menus.
Selects menu items.
Menu Activates the main menu.
Returns to the previous menu.
Exit Exits OSD menu.
No. OSD in hot key
menu
OSD icon in main menu
Function
OSD = On Screen Display. The hot keys only operate while the main menu is not currently displaying. Hot key displays will disappear after a few seconds of no key activity.
To unlock the OSD controls, press and hold any key for 10 seconds.
29 How to adjust your monitor
Initial setup for playing games You can optimize the monitor to enhance your gaming experience. You might want to start with the following settings.
1. Set the screen refresh rate to 144 Hertz (144 Hz).
a. Right-click the desktop and select Screen resolution. Click Advanced settings. Under the Monitor tab, change the screen refresh rate to 144 Hertz. And then click Apply and Yes to confirm the change.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen refresh rate. Refer to the Help document of your operating system for details.
30 How to adjust your monitor
b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to 144 Hz. Refer to the Help document that came with your game for details.
To check if the screen refresh rate has been changed, select Menu from the hotkey menu on your monitor, and go to System and Information. The refresh rate in Current Resolution should be 144 Hz.
2. Select a desired display mode. See Adjusting display mode on page 32.
3. Resize your display by Smart Scaling. See Using Smart Scaling on page 32.
4. Select an appropriate game mode for your game. FPS is for FPS games, while RTS is for RTS games. For more game modes, please download by Game Mode Loader. See Downloading more game modes using Game Mode Loader on page 32.
5. Adjust the brightness of your display. See Brightness (during 2D playback) / NVIDIA 3D LightBoost (during 3D playback) on page 37.
6. Adjust the brightness of the black shades by Black eQualizer. See Black eQualizer on page 38.
7. Adjust the monitor height. See Adjusting the monitor height on page 14.
If 144 Hz is not available in your menus, check the following:
make sure the DVI-D Dual Link cable is properly connected to your computer and the monitor
make sure your GPU supports 144 Hz
make sure your game supports 144 Hz.
31 How to adjust your monitor
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the Auto Adjustment function. Go to Display and Auto Adjustment to optimize the currently displayed image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as the desktop of your operating system. However, we recommend that you use auto.exe. As you run auto.exe, a test pattern displays.
2. Press any of the control keys to bring up the hot key menu. Select Menu to enter the main menu.
3. Go to Display and Auto Adjustment.
4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select Pixel Clock and adjust the monitor until the noise disappears.
5. If you notice a horizontal noise, select Phase and adjust the monitor until the noise disappears.
Customizing the hot keys The left 3 control keys (also called custom keys) perform as hot keys to provide direct access to pre-defined functions. You can change the default setting and designate different functions for these keys.
1. Press any of the control keys to bring up the hot key menu.
2. Select Menu to access the main menu.
3. Go to System.
4. Select the custom key you want to change.
5. In the sub menu, select a function that can be accessed by this key. A pop-up message will appear, showing that the setup is complete.
Setting up your own game mode There are several preset picture modes on your monitor that are suitable for games. To better suit your needs, you can change and save the related display settings, and switch to your own game mode easily.
1. Adjust the related available settings in different OSD menus.
2. After all settings are done, go to Save Settings and save as one of the game modes.
The default picture mode is FPS1, which is designed for FPS games. If you prefer other picture modes, go to Picture Advanced and change setting in Picture Mode.
When you connect a digital input signal using a digital (DVI or HDMI) cable to your monitor, the Auto Adjustment function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor when you use the Auto Adjustment function.
32 How to adjust your monitor
3. If you want to switch to your game mode at any time, go to Picture Advanced and Picture Mode, and select the game mode you saved in Step 2. Your preferred display settings will be applied all at once.
Downloading more game modes using Game Mode Loader Instead of customizing your own display settings, you can download the game modes available on the BenQ website and apply the settings directly.
1. Visit the local website from www.BenQ.com. Go to Support > Downloads > the Software tab under the purchased model.
2. Download and install the game mode loader.
3. Follow the on-screen instructions to complete the setup.
4. Go to Picture Advanced and Picture Mode on your monitor, and select the game mode you just downloaded to apply the settings directly.
Alternatively, you can access and apply new game modes via Display Pilot.
1. Install Display Pilot from the provided CD.
2. Launch Display Pilot and select Tools > Game Mode Loader.
3. Click Check Now to check for new game modes.
4. To apply the downloaded game modes, select one from the drop-down list in Tools, and click Apply.
Adjusting display mode To display images of aspect ratios other than your monitor aspect ratio and sizes other than your display size, you can adjust the display mode on the monitor. For the aspect ratio and display size of your monitor, see the specifications on the CD.
1. Press any of the control keys to bring up the hot key menu, and press Menu to access the main menu.
2. Go to Picture Advanced and Display Mode.
3. Select an appropriate display mode. The setting will take effect immediately.
Using Smart Scaling You can resize your display by Smart Scaling.
1. Go to Picture Advanced and Smart Scaling.
BenQ offers more optimized game modes on the website. If you prefer to use these settings, refer to Downloading more game modes using Game Mode Loader on page 32.
Internet connection is required for this operation.
Switch to the desired display mode first, and follow the instructions in Using Smart Scaling on page 32 to adjust the display size to precisely suit your needs.
33 How to adjust your monitor
2. Adjust the value.
Using Instant Mode While playing games, you can diminish the input lag by activating Instant Mode.
1. Go to Picture and Instant Mode.
2. Select On.
If one of the custom keys is preset for Smart Scaling, you can press the custom key and adjust the value directly.
Your display may become unstable temporarily when being resized. This is a normal phenomenon and should not be considered as manufacturing defect.
For more information on Smart Scaling, go to Smart Scaling on page 42.
34 Navigating the main menu
Navigating the main menu
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Press any of the control keys to bring up the hot key menu. Select Menu to enter the main menu. See Basic menu operation on page 27 for details.
Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. For models without certain functions, their settings and related items will not appear on the menu.
For more information on each menu, please refer to the following pages:
Display menu on page 35
Picture menu on page 37
Picture Advanced menu on page 40
Save Settings menu on page 44
Audio menu on page 45
System menu on page 46
The OSD menu languages may differ from the product supplied to your region, see Language on page 47 under System and OSD Settings for more details.
35 Navigating the main menu
Display menu Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. For models without certain functions, their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Display.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
50
Mode: Standard
Auto Adjustment
H.Position
V.Postion
Pixel Clock
Phase
Display
Picture
Picture Advanced
Save Settings
Audio
System
Item Function Range
Auto Adjustment Optimizes and adjusts the screen settings automatically for you.
Not applicable to a digital input signal.
H. Position Adjusts the horizontal position of the screen image. 0 to 100
V. Position Adjusts the vertical position of the screen image. 0 to 100
36 Navigating the main menu
Pixel Clock