Bang Olufsen Beocom 2500 User's Guide
![Bang Olufsen Beocom 2500 manual cover](/images/75e093b06e719a9870b56e78/thumbs/thumb175x175.webp)
To reset the Beocom 2500 to factory settings, unplug the phone from the power source, wait for 10 seconds, and then plug it back in while holding down the 'Mute' button until the display indicates a reset.
If the display is not functioning, ensure that the phone is properly connected to the power source. If the issue persists, try a different outlet or check for visible damage to the power cable.
To adjust the ringer volume, press the 'Volume' button on the side of the handset while the phone is ringing. You can cycle through the volume levels until you reach the desired setting.
To change the language on the Beocom 2500, press the 'Menu' button, navigate to 'Settings', select 'Language', and choose your preferred language from the list.
To enable call forwarding, access the 'Menu', select 'Call Settings', and choose 'Call Forwarding'. Enter the number to which you want calls forwarded and confirm the action.
The Beocom 2500 is an analog phone and requires a compatible VOIP adapter to connect to a VOIP service. Ensure the adapter supports analog connections and configure it according to the VOIP provider's instructions.
If there's no dial tone, check all cable connections to ensure they are secure. Try using a different phone line or port. If the issue continues, contact your service provider for further assistance.
To clean your Beocom 2500, use a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as they can damage the surface. Ensure the phone is unplugged before cleaning.
For sound quality issues, check the handset and base unit connections. Ensure there is no interference from other electronic devices. If the problem persists, test the phone on another line to rule out line issues.
The Beocom 2500 is a corded phone, so the range is limited by the length of the handset cord. For additional mobility, consider using a compatible extension cord.