AEG HG60FXA, HG75FXA, HG90FXA User's Manual
![AEG HG60FXA, HG75FXA, HG90FXA manual cover](/images/7504e170b06910503a80c92a/thumbs/thumb175x175.webp)
To clean the burners, first ensure they are completely cool. Remove the burner caps and wash them with warm soapy water. Use a non-abrasive brush to clean the burner heads and slots, then dry thoroughly before reassembling.
Check if the hob is properly plugged in and ensure the gas supply is on. Clean the igniter with a dry cloth to remove any food debris. If the problem persists, consult the user manual or contact a professional technician.
Use cookware with smooth, clean bottoms and avoid sliding pots across the surface. Regularly clean the hob with a soft cloth and a suitable cleaner to maintain its appearance and prevent scratches.
Regularly clean the burners, knobs, and surface. Inspect the gas connections and hoses for any signs of wear or leaks. Ensure the burners are correctly positioned to avoid uneven cooking.
Turn off the main gas valve before disconnecting the hob. Follow the manufacturer's instructions or consult a certified gas technician for safe disconnection and reconnection.
An uneven or yellow flame may indicate a blockage in the burner or insufficient air supply. Clean the burner and check that the air shutter is not obstructed. If the issue persists, seek professional assistance.
Use flat-bottomed, heavy-gauge cookware that matches the size of the burner. Avoid using cookware with uneven bases, as this can affect cooking efficiency and damage the hob surface.
Apply a soapy water solution to the gas connections and hoses. If bubbles form, there may be a leak. Turn off the gas supply immediately and contact a professional technician to inspect and repair the leak.
Yes, conversion kits are available for this purpose. It is recommended to have the conversion performed by a qualified gas technician to ensure safety and compliance with local regulations.
Turn off the hob and unplug it from the power source for a few minutes. Reconnect the power and try igniting the burners again. If the issue persists, refer to the user manual or contact customer support.