AEG BPK74378PT User's Manual

To preheat the AEG BPK74378PT, press the power button, select the desired cooking mode, and use the temperature dial to set the desired temperature. The oven will automatically begin preheating.
Check that the oven is properly plugged in and that the circuit breaker is not tripped. Also, ensure the timer is not set to delay start. If the issue persists, consult the user manual for troubleshooting or contact customer service.
Activate the pyrolytic self-cleaning function by selecting the cleaning mode on the control panel. The oven will lock and heat up to a high temperature to burn off residue. After cooling, wipe away the ash with a damp cloth.
You can use a variety of oven-safe cookware, including metal, glass, ceramic, and silicone. Avoid using plastic or non-oven-safe materials. Always check the manufacturer's guidelines for specific temperature limits.
Use the temperature control dial to adjust the oven's temperature. Turn the dial to the desired temperature, and the oven will automatically adjust its heating elements to maintain the set temperature.
Yes, the AEG BPK74378PT is designed to operate the grill function with the door closed. This enhances safety and efficiency, as well as ensures even grilling.
Ensure the oven is off and completely cool. Remove the glass cover by turning it counterclockwise. Replace the bulb with a new, oven-safe bulb of the same type and wattage. Reattach the glass cover by turning it clockwise.
Refer to the user manual's troubleshooting section to identify the error code. Most codes relate to specific issues, such as sensor faults. If unresolved, contact AEG customer support for further assistance.
It is normal to hear fan noises, especially when the oven is cooling down. However, if you notice unusual or loud noises, check for obstructions or loose components and consult the manual or a technician if necessary.
Regular maintenance includes cleaning the oven interior after use and running the pyrolytic cleaning cycle periodically. Check the door seal, hinges, and other components every few months for wear and tear.