AEG DCE5280HM User's Manual
![AEG DCE5280HM manual cover](/images/65a9c2c0eeeb4dc52d7e5a66/thumbs/thumb175x175.webp)
To clean the filter, locate it at the bottom of the unit. Remove it by turning it counterclockwise. Wash it under running water, let it dry completely, and then reinstall it by turning it clockwise until secure.
Ensure that the filters are clean and not blocked. Check the ducting for obstructions and ensure it is properly installed. Also, verify that the extraction rate is set to an appropriate level for your cooking needs.
First, disconnect the appliance from the power supply. Remove the light cover by gently prying it off. Replace the bulb with a new one of the same type and wattage. Reattach the light cover and reconnect the power supply.
Unusual noises may be caused by loose components or obstructions in the fan or ducting. Check that all components are securely fastened and inspect the ducting for any blockages or debris.
Regular maintenance includes cleaning the filters monthly, checking and cleaning the fan blades, and ensuring all connections and ducting are secure. It is also advisable to wipe the exterior surfaces with a damp cloth regularly.
To reset the unit, disconnect it from the power supply for a few minutes. Reconnect it and set your preferred settings again. This should resolve any temporary issues caused by the power failure.
Check if the unit is plugged in and the power supply is functioning. Inspect the fuse or circuit breaker to ensure it hasn't tripped. If these are all in order, contact a professional technician for further diagnosis.
Use the control panel to adjust the extraction rate. Press the fan speed button to cycle through the available settings until you reach the desired extraction level.
Yes, the unit can be used in recirculation mode. Ensure that the carbon filters are installed to effectively filter the air before it is recirculated back into the kitchen.
Carbon filters should be replaced every 3 to 6 months depending on usage. Regular replacement ensures optimal performance in recirculation mode.