Zanussi ZXAE15DW1 User Manual
![Zanussi ZXAE15DW1 Refrigerator manual cover](/images/PWEhPoRtKNWfzulYRqLFpfoA/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the thermostat control inside the refrigerator compartment. Turn the dial clockwise to lower the temperature and counter-clockwise to raise it. Allow 24 hours for the new settings to stabilize.
Check if the door is closing properly and the seals are intact. Ensure the temperature settings are correct. Clean the condenser coils at the back of the unit and make sure there's adequate ventilation around the refrigerator.
The Zanussi ZXAE15DW1 is a frost-free model, so manual defrosting is not required. However, if you notice ice build-up, it could indicate a problem with the door seal or thermostat settings.
Use a solution of mild soap and water to clean the interior surfaces. Avoid abrasive cleaners which can damage surfaces. Rinse with a clean damp cloth and dry thoroughly.
Check if the refrigerator is level and make sure it is not touching the wall or other objects. Noises can also be caused by the compressor or fan; if noises persist, consider contacting a professional technician.
First, check if the refrigerator is properly plugged in and the power is on. If the light is still not working, replace the bulb with a new one of the same type and wattage.
Place items so that there is space between them for air to circulate. Store raw meats on the bottom shelf to prevent drips from contaminating other foods. Use airtight containers to preserve food freshness and reduce odors.
Regularly clean the condenser coils every six months, check door seals monthly for any damage, and ensure the interior is clean. Replace the water filter if applicable every six months or as needed.
Keep foods in airtight containers, regularly clean the interior, and use baking soda or a specialized fridge deodorizer to absorb odors. Ensure any spills are cleaned immediately.
Inspect the door gasket for cracks or deformities and clean it with soapy water to remove any build-up that might be affecting the seal. If the gasket is damaged, it might need to be replaced.