Zanussi ZNFN18FS5 User Manual
![Zanussi ZNFN18FS5 Refrigerator manual cover](/images/AqygBVKUFstEvnryiImWjJYt/thumbs/thumb175x175.webp)
To adjust the temperature, use the control panel located inside the fridge. Press the temperature adjustment button until you reach the desired setting. The display will show the current temperature setting.
First, check if the refrigerator is plugged in and the power is on. Ensure that the door is closing properly and that the seals are clean. If the problem persists, try adjusting the temperature settings or consult the user manual for further troubleshooting steps.
The Zanussi ZNFN18FS5 is a frost-free model, so manual defrosting is not required. However, periodic cleaning is recommended to ensure optimal performance.
To clean the interior, remove all food items and shelves. Use a soft cloth with a mixture of mild detergent and warm water. Rinse and dry thoroughly before replacing shelves and food.
To change the light bulb, unplug the refrigerator and locate the light cover inside the fridge. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Water pooling can be due to a blocked defrost drain. Check the drain for obstructions and clear any blockages. Ensure that the refrigerator is level to allow proper drainage.
To maximize energy efficiency, ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the door seals clean and in good condition, and do not overload the fridge. Regularly check and adjust temperature settings as needed.
Unusual noises can be due to the refrigerator not being level or items inside vibrating. Ensure the appliance is on a flat surface and rearrange items to prevent them from touching the interior walls. If the noise persists, contact customer service.
It is not recommended to store food directly against the back wall, as this can block air circulation and affect cooling efficiency. Maintain a small gap between items and the back wall.
Regular maintenance includes cleaning the interior and exterior surfaces, checking and cleaning door seals, ensuring proper temperature settings, and inspecting the defrost drain for blockages.