Zanussi ZGGN755K User Manual
![Zanussi ZGGN755K Hob manual cover](/images/fUPLcoysrnZStUiHJbjKQHNN/thumbs/thumb175x175.webp)
To ignite the burners, press and turn the desired burner control knob counterclockwise to the maximum setting. Hold down the knob to activate the ignition process until the flame is established.
Ensure that the burner parts are properly aligned and clean. Make sure the gas supply is adequate and check for any obstructions in the burner holes.
Remove the pan supports and wash them in warm soapy water. Avoid using abrasive cleaners. Rinse thoroughly and dry completely before placing them back on the hob.
Check if the hob is connected to the power supply and ensure the gas supply is turned on. Also, verify that the ignition electrodes are clean and dry.
Yes, the hob is suitable for use with a wok. Ensure that you use a wok support ring for stability and even heat distribution.
Regularly clean the hob surface and components after each use. Inspect the gas connection and burners monthly for any signs of wear or damage. Annual professional servicing is recommended.
Turn off the main gas valve connected to the hob. It is advisable to contact a professional if you are unsure about the disconnection process.
Immediately turn off all burner knobs and the main gas supply. Open windows for ventilation and do not use any electrical appliances. Contact a qualified technician to inspect the hob.
Yes, the clicking sound is normal as it indicates the ignition system is working to light the flame. If the clicking persists after ignition, check for blockages or moisture near the electrodes.
Adjust the flame size by turning the burner control knob to the desired setting. Each knob allows for precise control of the flame intensity, ranging from a low simmer to a high flame.