Yamaha Arius YDP-S31 Data List
![Yamaha Arius YDP-S31 Piano manual cover](/images/CkbjZNcfgpPNTUtomXdYmOmM/thumbs/thumb175x175.webp)
To connect headphones to the Yamaha Arius YDP-S31, locate the headphone jacks on the bottom left of the unit. Insert the headphone plug into either of the two jacks. This will automatically mute the internal speakers, allowing for private practice sessions.
If the piano does not turn on, ensure that the power cord is securely connected to both the piano and the wall outlet. Check that the outlet is working by testing another device. If the issue persists, inspect the power cord for damage and consider replacing it or contacting Yamaha support for further assistance.
To record, press the 'Rec' button and then play your piece. Press 'Stop' when finished. To playback, press the 'Play' button. Ensure the volume is adjusted appropriately to hear the playback.
Routinely dust the piano with a soft cloth. Avoid using cleaners or solvents. Check the power cord and connections regularly for wear. If anything seems off with the sound or keys, consult with a professional technician.
The touch sensitivity of the keys can be adjusted by pressing the 'Function' button, followed by a specific key on the keyboard that corresponds to the desired sensitivity level: Hard, Medium, or Soft. Consult the manual for the exact key mapping.
Use a slightly dampened cloth with water to gently wipe the keys. Avoid using any chemical cleaners. Dry the keys immediately with a soft, dry cloth to prevent any moisture damage.
To restore factory settings, turn off the piano. While holding down the highest white key, turn the power back on. Continue holding the key until the initialization is complete. This will reset all settings to their defaults.
Check to ensure that the volume is not muted and that the headphone jack is not in use. If specific keys are still not working, this may indicate a technical issue that requires professional servicing.
Yes, the Yamaha Arius YDP-S31 includes a built-in sustain pedal. Ensure that it is connected properly to the unit. If the pedal is not functioning, check the connection and consult the manual for troubleshooting steps.
To transpose, hold down the 'Function' button and press the key corresponding to the desired transposition value. Refer to the user manual for the specific key mappings and further instructions.