Whirlpool WFE510S0AS Owner's Manual

To clean the cooktop surface, use a non-abrasive cleaner and a soft cloth. Avoid using steel wool or abrasive pads, which can scratch the surface. For stubborn stains, a cooktop scraper can be used.
If your range is not heating properly, first ensure that it is plugged in and receiving power. Check if the circuit breaker has tripped. If these are not the issues, the heating element may need to be replaced.
To calibrate the oven temperature, press and hold the "Bake" button for 5 seconds until the display shows "00." Use the arrow keys to adjust the temperature up or down, then press "Start" to save the changes.
For cleaning the oven interior, use the self-cleaning function if available. Remove any large debris first. Alternatively, use a mixture of baking soda and water, apply it to the interior surfaces, and let it sit overnight before wiping clean.
To replace the oven light bulb, first disconnect the range from power. Remove the light cover by turning it counterclockwise, then replace the bulb with a new one of the same type and wattage. Reinstall the cover and reconnect the power.
A clicking noise is normal and is caused by the relays cycling the oven elements on and off to maintain the set temperature. However, if the clicking is loud or continuous, there may be an issue with the relay or control board.
To set the clock, press the "Clock" button, then use the "+" and "-" keys to set the correct time. Press "Clock" again or "Start" to confirm the time.
Aluminum foil can be used in the oven, but it should not touch the heating elements or line the oven's bottom as it can cause damage or a fire hazard. It's safe to use on baking trays or to cover dishes.
Regular maintenance includes cleaning the cooktop, oven, and control panel. Check and clean the oven door seals to ensure a proper seal. Inspect the power cord for any signs of wear.
To prevent the oven door from getting stuck, ensure the hinges are clean and free of debris. Lubricate the hinges if necessary and avoid slamming the door shut. Regularly check the door alignment and adjust if needed.