Whirlpool WET4124HW Owner's Manual
![Whirlpool WET4124HW Washer Dryer manual cover](/images/exATJtybYhDrFpJkHgMaeyxy/thumbs/thumb175x175.webp)
To clean the lint filter, locate it on the dryer section. Pull out the filter and remove any lint by hand. Rinse it under warm water if necessary and ensure it is completely dry before reinserting it into the machine.
Ensure that the appliance is plugged in and that the circuit breaker is not tripped. Check that the door is fully closed and that the cycle settings are correctly selected. If the issue persists, consult the user manual for further troubleshooting steps.
To prevent wrinkles, promptly remove clothes from the dryer as soon as the cycle ends. Use the 'Wrinkle Shield' option if available, and avoid overloading the washer or dryer.
Regularly clean the lint filter, check and clean the door seal, and run an empty wash cycle with a washing machine cleaner to remove residue. Inspect hoses for any signs of wear or leaks.
Ensure the washer is level by adjusting its feet. Avoid overloading the drum and distribute clothes evenly. Verify that the transit bolts have been removed if the appliance is newly installed.
Check the lint filter for blockages and ensure the exhaust vent is clear. Make sure the load size is appropriate and use the correct drying cycle and settings.
Ensure the washer/dryer is level and placed on a stable surface. Check for loose items inside the drum and tighten any loose screws or bolts.
Use a high-efficiency (HE) detergent to ensure optimal performance and to prevent excessive suds that can damage the machine.
Consult the user manual for the specific location of the drain pump filter. Typically, it is accessed through a small panel at the bottom front of the washer. Turn off the machine, open the panel, and remove any debris from the filter.
Use cold water for washing when possible, clean the lint filter regularly, and avoid overloading the washer and dryer to improve energy efficiency.