Whirlpool WUW35X15DS Owner's Manual
![Whirlpool WUW35X15DS Wine Cellar manual cover](/images/HCQMipWmjVRmxiVbUkVCgCZJ/thumbs/thumb175x175.webp)
To set the temperature, press the 'Up' or 'Down' arrow buttons on the control panel until you reach the desired temperature. The display will show the set temperature and will then revert to showing the current temperature inside the wine cellar.
First, ensure that the wine cellar is plugged in and the circuit breaker is not tripped. Check that the door is fully closed and the seal is intact. If the problem persists, clean the condenser coils and ensure there is adequate ventilation around the unit.
It is recommended to clean the condenser coils at least twice a year. This helps maintain efficient operation and prolongs the life of the wine cellar.
Yes, you can store other beverages like soft drinks or beer, but keep in mind that the temperature settings are optimized for wine storage. Adjust the temperature accordingly if you plan to store other types of beverages.
Condensation can occur if the door is not closed properly or if there is a high level of humidity in the environment. Ensure the door seals are clean and intact. Consider using a dehumidifier if the room is particularly humid.
To reverse the door swing, you will need to remove the door and hinges, then reinstall them on the opposite side. Refer to the instruction manual for detailed steps and ensure you have the necessary tools before starting.
For red wines, the ideal temperature is typically between 55°F and 65°F. For white wines, it's usually between 45°F and 55°F. Adjust the wine cellar settings according to the type of wine you are storing.
The Whirlpool WUW35X15DS is a frost-free model, so manual defrosting is not required. If frost builds up, ensure the door is sealing properly and that the unit is not overfilled, which can obstruct airflow.
If the control panel is unresponsive, try resetting the wine cellar by unplugging it for a few minutes and then plugging it back in. If the problem persists, contact Whirlpool customer support.
To replace the light bulb, unplug the wine cellar and remove the light cover inside the unit. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the light cover and plug the unit back in.