Whirlpool WFE500M4HS Owner's Manual
![Whirlpool WFE500M4HS Range manual cover](/images/UqZKSJWHfsxlMmtUScbiggxj/thumbs/thumb175x175.webp)
To perform a self-cleaning cycle, remove all racks and accessories from the oven. Press the 'Clean' button, select the desired cleaning level, and press 'Start'. The door will lock and the cleaning cycle will begin. Allow the oven to cool before wiping out any ash residue.
Ensure the range is plugged in and the circuit breaker is not tripped. Verify that the oven controls are set correctly. If the issue persists, inspect the heating elements for damage and consult a professional technician if needed.
Refer to the user manual for a list of error codes. Common solutions include resetting the range by unplugging it for a few minutes, ensuring proper connections, and contacting Whirlpool support for unresolved issues.
Use a non-abrasive cleaner specifically designed for glass cooktops. Apply the cleaner and use a soft cloth or sponge to wipe the surface. Avoid using steel wool or abrasive pads to prevent scratches.
Press and hold the 'Bake' button until the display shows '00'. Use the up or down arrow keys to adjust the temperature calibration. Press 'Start' to save the changes.
Check for obstructions around the door. Inspect the door gasket for damage and replace if necessary. If the door hinges are misaligned, consult a professional technician for adjustment.
Ensure the oven is off and cool. Remove the glass light cover by turning it counterclockwise. Replace the bulb with a new 40-watt appliance bulb. Reattach the light cover and turn it clockwise to secure.
Aluminum foil can be used to line baking trays but should not be used to line the oven bottom as it can cause damage. Avoid using foil to cover oven racks as it can block heat circulation.
Regularly clean the cooktop and oven interior. Check and replace damaged gaskets, and inspect the heating elements periodically. Perform a self-cleaning cycle as needed and ensure all electrical connections are secure.
Ensure the anti-tip bracket is installed correctly. This bracket is designed to secure the range to the floor and prevent tipping. Follow the installation instructions carefully or consult a professional if needed.