Vivotek AP-GIC-010A-030 Quick Installation Guide

Vivotek AP-GIC-010A-030 Injector manual cover
Pages 1
Year 0
Language(s)
English en

Vivotek AP-GIC-010A-030 Injector Specification

The Vivotek AP-GIC-010A-030 Injector is a high-performance Gigabit Power over Ethernet (PoE) injector designed to seamlessly integrate with network devices requiring both data and power transmission over a single Ethernet cable. This injector operates in compliance with IEEE 802.3af/at standards, delivering a maximum power output of up to 30 watts, making it suitable for a wide range of devices such as IP cameras, wireless access points, and VoIP phones. It supports 10/100/1000 Mbps data rates, ensuring high-speed connectivity for bandwidth-intensive applications.

The AP-GIC-010A-030 is equipped with a single RJ45 input port for data and a single RJ45 output port for data and power, simplifying the installation process by eliminating the need for separate power cables. It features a plug-and-play design, allowing for effortless integration into existing network infrastructures without requiring additional configuration or management. The injector also includes advanced protection mechanisms such as over-current, over-voltage, and short-circuit protection to safeguard connected devices from potential electrical damage.

Compact and robust, the Vivotek AP-GIC-010A-030 is designed for durability and reliability in various environments. Its metal casing provides enhanced protection against physical damage, while its ability to operate within a wide temperature range ensures consistent performance in challenging conditions. The injector is powered by a standard AC input, supporting a wide voltage range to accommodate different power sources. With its combination of efficiency, reliability, and ease of use, the Vivotek AP-GIC-010A-030 Injector is an ideal solution for expanding network capabilities while reducing infrastructure complexity.

Vivotek AP-GIC-010A-030 Injector F.A.Q.

How do I install the Vivotek AP-GIC-010A-030 Injector?

To install the Vivotek AP-GIC-010A-030 Injector, connect the power cable to the injector, then connect the Ethernet cable from your network switch to the data input port. Connect another Ethernet cable from the data and power output port to your PoE device. Ensure all connections are secure.

What type of devices can the Vivotek AP-GIC-010A-030 Injector power?

The Vivotek AP-GIC-010A-030 Injector is designed to power PoE-enabled devices such as IP cameras, VoIP phones, and wireless access points that comply with IEEE 802.3af/at standards.

How can I troubleshoot if my PoE device is not receiving power from the Vivotek Injector?

First, ensure the injector is connected to a power source. Check all cable connections and verify they are properly seated. Test with a different Ethernet cable and ensure the PoE device is compatible with the injector's output specifications.

What is the maximum power output of the Vivotek AP-GIC-010A-030 Injector?

The Vivotek AP-GIC-010A-030 Injector provides a maximum power output of 30 watts, suitable for devices requiring high power through PoE.

Can the Vivotek Injector be used outdoors?

The Vivotek AP-GIC-010A-030 Injector is designed for indoor use. If outdoor deployment is necessary, ensure it is housed in a weatherproof enclosure to protect it from the elements.

How do I maintain the Vivotek AP-GIC-010A-030 Injector for optimal performance?

Regularly inspect the injector for dust and debris, and clean it with a dry cloth. Ensure that the ventilation openings are not blocked and check all cable connections periodically to prevent wear and tear.

What should I do if the Vivotek Injector overheats?

If the injector overheats, immediately unplug it from the power source. Allow it to cool down, then check for obstructions in the ventilation openings. Ensure it is placed in a well-ventilated area away from direct sunlight or heat sources.

Is there an LED indicator on the Vivotek Injector to show its status?

Yes, the Vivotek AP-GIC-010A-030 Injector has an LED indicator that shows the power status. A solid light indicates normal operation, while no light suggests a power issue.

How can I check if my PoE device is compatible with the Vivotek Injector?

Ensure your PoE device complies with IEEE 802.3af/at standards and does not exceed the 30-watt power output capacity of the injector. Refer to your device's specifications for compatibility details.

What should I do if the Ethernet connection through the Injector is slow or unstable?

Check the Ethernet cables for any damage or poor connections. Try replacing them with high-quality, shielded cables. Ensure the network switch and PoE device are configured correctly and support the required network speeds.