Toyota Sienna 2019 Quick Reference Guide
![Toyota Sienna 2019 Minivan manual cover](/images/izFweQlXRmyLpcSSIIKOwfpu/thumbs/thumb175x175.webp)
To connect your smartphone via Bluetooth, first ensure that your phone's Bluetooth is turned on. Then, navigate to the 'Settings' menu on the Sienna's infotainment screen, select 'Bluetooth', and search for available devices. Select your phone from the list and confirm the pairing code on both your phone and the vehicle's display.
The recommended tire pressure for the 2019 Toyota Sienna is typically 35 PSI for both front and rear tires. However, it's best to refer to the sticker located on the driver's side door jamb for the most accurate information.
To reset the maintenance required light, turn the ignition to the 'ON' position without starting the engine. Use the trip meter button to navigate to 'Trip A'. Turn the ignition off, then hold the trip meter button while turning the ignition back to the 'ON' position. Continue holding the button until the maintenance light turns off.
The 2019 Toyota Sienna typically requires 0W-20 synthetic motor oil. Always check your owner's manual for the most accurate and specific recommendations for your vehicle.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector from the bulb, then take out the rubber boot. Twist the old bulb counterclockwise to remove it. Insert the new bulb, replace the rubber boot, and reconnect the power connector.
If the air conditioning is not blowing cold air, check the refrigerant level as it might be low. Inspect the cabin air filter for blockages, and ensure that the AC system’s compressor is functioning properly. If the issue persists, it may require professional diagnosis.
To update the navigation system, you will need to download the latest map updates from Toyota’s official website onto a USB drive. Insert the USB drive into the vehicle’s USB port, then follow the on-screen instructions to install the updates.
A rattling noise could be caused by loose components such as the exhaust system, heat shields, or suspension parts. Inspect these areas for any visible issues, and consider consulting a mechanic if you're unable to identify the source of the noise.
To replace the key fob battery, use a small flathead screwdriver to gently pry open the key fob casing. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side is facing up. Snap the casing back together.
If the sliding door is stuck, check for any obstructions in the track. Ensure that the vehicle is in 'Park' and try to manually open the door. If it remains stuck, check the door's fuse and motor for issues, and consider seeking professional assistance.