Toyota 4Runner 2008 Quick Reference Guide
![Toyota 4Runner 2008 SUV manual cover](/images/YFuFrLToWxIyFmxAPVXEotWX/thumbs/thumb175x175.webp)
To reset the maintenance required light, turn the ignition switch to the "ON" position. Ensure the odometer is set to "ODO" mode. Turn the ignition switch to "OFF". Press and hold the trip reset button while turning the ignition switch back to "ON". Continue holding the button until the light turns off.
The recommended engine oil for a 2008 Toyota 4Runner is 5W-30. It is advised to use high-quality oil that meets API certification.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintaining correct tire pressure, using the recommended grade of motor oil, and removing excess weight from the vehicle. Additionally, practice smooth acceleration and braking.
The 2008 Toyota 4Runner has a towing capacity of up to 5,000 pounds, provided it is properly equipped and you follow all towing guidelines.
To replace the cabin air filter, open the glove box and remove the restraining arm. Squeeze the sides of the glove box to release it from its hinges. Locate the filter housing cover, unclip it, and replace the old filter with a new one. Reassemble in reverse order.
Common transmission issues include rough shifting or delayed engagement. Regular maintenance, such as fluid checks and timely servicing, can help mitigate these issues. If problems persist, consult a professional mechanic.
To check the transmission fluid level, start the engine and ensure the vehicle is on a level surface. Shift through all gears, ending in "Park". Remove the transmission dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level.
If the check engine light comes on, first ensure the gas cap is tight. If the light remains, use an OBD-II scanner to retrieve the error code, or take the vehicle to a qualified mechanic for diagnosis.
The timing belt on a 2008 Toyota 4Runner should generally be replaced every 90,000 miles or 6 years, whichever comes first. Check the owner's manual for specific recommendations.
The recommended tire pressure for a 2008 Toyota 4Runner is typically 32 psi for the front and rear tires. Verify with the sticker located on the driver's side door jamb for exact specifications.