Toyota Sienna 2016 Quick Reference Guide
![Toyota Sienna 2016 Minivan manual cover](/images/tfMNGRaXKjhPuwGdeTkzyoyj/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition switch to the "ON" position, but do not start the engine. Set the odometer to display the "ODO" reading, then turn the ignition off. Press and hold the trip meter reset button while turning the ignition back to "ON". Hold the button until the maintenance light turns off.
The recommended oil type for a 2016 Toyota Sienna is 0W-20 synthetic oil. This oil helps improve fuel economy and engine performance.
To pair your phone, ensure Bluetooth is enabled on your phone. On the Sienna's touchscreen, navigate to the "Setup" menu, select "Bluetooth", and then "Add New Device". Follow the prompts on both the vehicle's display and your phone to complete the pairing process.
The 2016 Toyota Sienna has a towing capacity of up to 3,500 pounds when properly equipped with a tow package.
To replace the battery, use a small flathead screwdriver to gently pry open the key fob casing. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up. Snap the casing back together.
The 2016 Toyota Sienna requires a Toyota Super Long Life Coolant, which is a pink, ethylene glycol-based coolant designed to provide optimal performance and longevity.
It is recommended to inspect the transmission fluid every 30,000 miles and replace it approximately every 60,000 miles, depending on driving conditions. Always refer to the owner's manual for specific intervals.
If the air conditioning is not blowing cold air, check the refrigerant levels, inspect for any visible leaks, and ensure that the AC compressor is functioning. It might also be beneficial to check the cabin air filter for clogs.
The recommended tire pressure for a 2016 Toyota Sienna is typically 36 PSI for both front and rear tires. However, always check the placard located on the driver's side door jamb for the most accurate specifications.
To change a flat tire, first ensure the vehicle is on a stable surface. Loosen the lug nuts slightly, then raise the vehicle using the jack. Remove the lug nuts completely, replace the flat tire with the spare, secure the lug nuts, and lower the vehicle. Tighten the lug nuts fully in a star pattern.