Toyota Sienna 2012 Quick Reference Guide
![Toyota Sienna 2012 Minivan manual cover](/images/RpeTeRrQkhLIUHkVltbqnIrU/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the trip meter reset button until "Trip A" is displayed. Turn the ignition off, then hold the reset button while turning the ignition back to "ON". Hold the button until the maintenance light turns off.
The 2012 Toyota Sienna typically requires 0W-20 synthetic oil for optimal performance. Refer to the owner's manual for specific recommendations.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the old bulb, and insert the new bulb. Reconnect the power connector and test the light before closing the hood.
The recommended tire pressure for the 2012 Toyota Sienna is typically 35 PSI for both front and rear tires. Check the tire placard located on the driver's side door jamb for exact specifications.
Check if the power door switch is turned on, verify the child safety lock is not engaged, inspect the fuse related to the power door, and ensure the battery is charged. If the issue persists, consult a professional mechanic.
If the engine overheats, pull over safely and turn off the engine. Allow the engine to cool before checking coolant levels. Do not open the radiator cap while the engine is hot. If coolant is low, add more only when the engine is cool. Seek professional help if the issue continues.
It's recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check your owner's manual for specific intervals.
The 2012 Toyota Sienna has a towing capacity of up to 3,500 pounds when properly equipped with the towing package. Always consult your owner's manual for towing guidelines.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, drive smoothly, avoid excessive idling, and remove unnecessary weight from the vehicle.
To pair your phone, ensure Bluetooth is enabled on your device. On the Sienna's audio system, select "Setup," then "Bluetooth," and choose "Add New Device." Follow the prompts on your phone and the vehicle's display to complete pairing.