Toyota Sequoia 2020 Quick Reference Guide
![Toyota Sequoia 2020 SUV manual cover](/images/AIMETAvnXFLhujZMZGQuOVtY/thumbs/thumb175x175.webp)
To connect your smartphone via Bluetooth, ensure your phone's Bluetooth is turned on. In the Sequoia, go to the "Menu" on the multimedia screen, select "Setup," then "Bluetooth," and follow the prompts to pair your device.
The recommended tire pressure for the Toyota Sequoia 2020 is typically 35 PSI for both front and rear tires. Always check the owner's manual or the door jamb sticker for exact specifications.
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press the odometer button until you see "Trip A." Turn the ignition off, then press and hold the odometer button while turning the ignition back on. Hold until the maintenance light turns off.
The Toyota Sequoia 2020 typically uses SAE 0W-20 synthetic oil. Always refer to the owner's manual for confirmation and specific recommendations.
To improve fuel efficiency, maintain proper tire pressure, remove excess weight, use cruise control on highways, and ensure regular maintenance such as oil changes and air filter replacements.
To use adaptive cruise control, activate the system using the cruise control button on the steering wheel. Set your desired speed and use the distance control button to set the preferred following distance.
If the check engine light comes on, ensure the gas cap is tight, as this is a common cause. If the light remains on, have your vehicle diagnosed by a professional mechanic to identify any underlying issues.
To change a flat tire, secure the vehicle on a flat surface, use the jack to lift the vehicle, remove the lug nuts with a wrench, replace the flat tire with the spare, and tighten the lug nuts securely before lowering the vehicle.
The Toyota Sequoia 2020 has a towing capacity of up to 7,400 pounds. Ensure you use the correct towing equipment and adhere to safety guidelines when towing.
To replace the cabin air filter, open the glove box and remove the limiting stop arm. Press the sides of the glove box inward to lower it completely. Remove the filter cover, replace the old filter with a new one, and reassemble.