Toyota Sequoia 2017 Quick Reference Guide
![Toyota Sequoia 2017 SUV manual cover](/images/izBahlkvEaDeWjtElNMPoZKD/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2017 Toyota Sequoia, turn the ignition switch to the "ON" position without starting the engine. Press the "TRIP" button until "TRIP A" is displayed. Turn the ignition off, press and hold the "TRIP" button, then turn the ignition back to "ON". Continue holding the button until the reset is complete.
The 2017 Toyota Sequoia typically requires 0W-20 synthetic oil for optimal performance and efficiency. Always check the owner's manual or consult with a professional mechanic to confirm the best oil type for your vehicle.
To improve fuel efficiency, maintain proper tire pressure, perform regular engine maintenance, use the recommended grade of motor oil, reduce excess weight in the vehicle, and drive at steady speeds. Avoid rapid acceleration and excessive idling.
The 2017 Toyota Sequoia has a maximum towing capacity of approximately 7,400 pounds when properly equipped. Ensure that your vehicle is fitted with the necessary towing package and equipment.
To pair your phone with the 2017 Toyota Sequoia's Bluetooth system, enable Bluetooth on your phone. On the vehicle’s audio system, navigate to the Bluetooth settings and select "Add Device". Follow the prompts on both the phone and the vehicle system to complete pairing.
If the key fob is not working, first replace the battery. If it still doesn't work, try reprogramming the fob or checking for any interference from other electronic devices. If the issue persists, consult a Toyota dealership or a qualified locksmith.
It's recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the air filter condition during regular maintenance and replace it more frequently if you drive in dusty or polluted areas.
Common causes for a check engine light include a loose gas cap, a faulty oxygen sensor, issues with the catalytic converter, or problems with spark plugs and ignition coils. A diagnostic scan can help pinpoint the exact issue.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector and the rubber cover. Release the clip holding the bulb in place and remove the old bulb. Insert the new bulb, secure the clip, replace the rubber cover, and reconnect the power connector.
The recommended tire pressure for the 2017 Toyota Sequoia is typically 35 PSI for both front and rear tires. Always refer to the tire information placard in the driver's side door jamb or the owner's manual for the most accurate information.