Toyota Sequoia 2009 Quick Reference Guide

The recommended engine oil for the 2009 Toyota Sequoia is 5W-20 for optimal performance and fuel efficiency.
To reset the maintenance required light, turn the ignition switch to the "ON" position, set the odometer to "ODO" mode, turn off the ignition, hold the trip reset button, and turn the ignition back to "ON". Hold the button until the light turns off.
The 2009 Toyota Sequoia has a towing capacity of up to 7,400 pounds, depending on the specific model and configuration.
To change the air filter, open the hood, locate the air filter housing, unclip the cover, remove the old filter, insert the new filter, and securely fasten the cover.
Starting issues could be due to a weak or dead battery, faulty starter, corroded battery terminals, or a faulty ignition switch. It's advisable to check these components.
For the 2009 Toyota Sequoia, it's recommended to inspect the timing belt at 60,000 miles and replace it by 90,000 miles, or according to the manufacturer's maintenance schedule.
Yes, you can use synthetic oil in your 2009 Toyota Sequoia. Synthetic oil can offer better performance and longer intervals between oil changes.
Common brake problems include worn brake pads, warped rotors, and brake fluid leaks. Regular inspections and maintenance can help prevent these issues.
Check if the A/C system is blowing warm air, inspect the refrigerant level, examine the compressor, and ensure that the A/C condenser fans are working properly.
If the check engine light comes on, check for any loose gas caps, which is a common cause. If the light remains, use an OBD-II scanner to read the error code and address the specific issue.