Toyota Sequoia 2008 Quick Reference Guide

For optimal performance, change the oil every 5,000 miles or every 6 months, whichever comes first. This helps maintain engine health and efficiency.
The recommended transmission fluid for a 2008 Toyota Sequoia is Toyota Genuine ATF WS. Using the correct fluid ensures smooth gear shifts and prolongs transmission life.
To reset the maintenance light, turn the ignition switch to the 'ON' position, set the odometer to 'ODO', turn off the ignition, press and hold the reset button, and turn the ignition to 'ON' while holding the button until the light turns off.
The 2008 Toyota Sequoia has a towing capacity of up to 7,400 pounds when properly equipped. Always ensure your vehicle is equipped with the necessary towing accessories.
Maintain regular service intervals, ensure tires are properly inflated, use recommended oil types, and avoid excessive idling to improve fuel efficiency.
The recommended tire pressure for a 2008 Toyota Sequoia is typically 30 psi for both front and rear tires, but always check the driver's side door jamb for specific recommendations.
Engine overheating can be caused by a faulty thermostat, low coolant level, radiator issues, or a malfunctioning water pump. Inspect these components and consult a mechanic if necessary.
To replace the cabin air filter, open the glove box, remove the damper, press in the sides of the glove box to lower it further, and access the filter cover. Replace the old filter with a new one and reassemble.
Common issues include worn brake pads, warped rotors, and brake fluid leaks. Regular inspections and timely replacements can prevent most braking system problems.
Ensure Bluetooth is enabled on your phone, press the 'Setup' button on the audio system, navigate to 'Bluetooth', and follow prompts to pair your device. Refer to the owner's manual for detailed instructions.