Toyota RAV4 Hybrid 2020 Quick Reference Guide

Turn on the ignition without starting the engine. Use the trip meter button to navigate to the 'Trip A' screen. Turn off the ignition, then press and hold the trip meter button. While holding, turn the ignition back on and continue holding until the screen resets to 0.
The recommended oil type for the 2020 Toyota RAV4 Hybrid is SAE 0W-16 full synthetic oil for optimal performance and fuel efficiency.
Ensure regular maintenance, check tire pressure, minimize aggressive driving, and use the ECO mode. Additionally, reduce excess weight and avoid prolonged idling.
Turn on Bluetooth on your smartphone. On the RAV4's multimedia display, go to 'Setup', select 'Bluetooth', then 'Add New Device'. Follow the prompts to complete the pairing process.
Check the battery connections and ensure the key fob battery is not dead. If the issue persists, verify fuel levels and consult a professional if necessary.
Open the glove box and remove the support arm. Push in on both sides of the glove box to release it. Remove the filter cover, then pull out the old filter and insert the new one. Reassemble in reverse order.
A squealing noise could indicate worn brake pads or the presence of debris. Inspect the brake pads and clean or replace them if necessary. Consult a mechanic if the noise persists.
EV mode allows the vehicle to operate using only the electric motor, ideal for short distances and low-speed driving. It helps reduce fuel consumption and emissions.
It is recommended to follow the service schedule in the owner's manual, typically every 5,000 to 7,500 miles. Regular maintenance includes oil changes, tire rotations, and brake inspections.
Use a tire pressure gauge to check each tire, including the spare. The recommended tire pressure is listed on the driver's side door jamb. Adjust the pressure as needed for optimal performance.