Toyota RAV4 2019 Quick Reference Guide
![Toyota RAV4 2019 SUV manual cover](/images/QEbubpNVcGmgmoCXYjfIqmNv/thumbs/thumb175x175.webp)
To connect your phone, enable Bluetooth on your phone, then go to the RAV4's infotainment system. Select 'Setup' > 'Bluetooth' > 'Add Device', and choose your phone from the list. Confirm any pairing codes shown on both devices.
The recommended oil type for a Toyota RAV4 2019 is SAE 0W-20 full synthetic oil. Always check your owner’s manual for the best recommendations.
It is recommended to change the cabin air filter every 15,000 to 20,000 miles, or once a year, depending on driving conditions.
The Toyota RAV4 2019 has a towing capacity of up to 1,500 pounds. For models equipped with the Adventure trim, the towing capacity increases to 3,500 pounds.
To reset the maintenance light, turn the ignition to the 'On' position without starting the engine. Use the meter control switch to navigate to the settings menu and select 'Maintenance Reset'.
Common causes include a loose fuel cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the ignition system. A diagnostic scan tool can help pinpoint the exact cause.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector and the bulb holder, then replace the old bulb with a new one. Reconnect the holder and the power connector.
The recommended tire pressure for a Toyota RAV4 2019 is typically 35 PSI for both front and rear tires. Check the placard on the driver’s side door for specific information.
To update the navigation system, visit the Toyota website to download the latest map updates onto a USB drive. Insert the USB into the vehicle’s port and follow the on-screen instructions to complete the update.
A squeaking noise when braking may indicate worn brake pads, glazed pads and rotors, or debris caught in the braking system. It is advisable to have a professional inspection to determine the exact cause.