Toyota Highlander Hybrid 2020 Quick Reference Guide
![Toyota Highlander Hybrid 2020 SUV manual cover](/images/mLdnPKfYlBgIqrCCxDrqvDEj/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition on without starting the engine. Use the ODO/TRIP button to navigate to the ODO display. Turn off the ignition. Press and hold the ODO/TRIP button and turn the ignition back on. Continue holding the button until the maintenance light turns off.
The recommended tire pressure for the Toyota Highlander Hybrid 2020 is typically 36 psi for both the front and rear tires. Always check the driver’s side door placard for exact specifications.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, remove excess weight, use eco mode, and drive smoothly avoiding rapid acceleration and heavy braking.
The 2020 Toyota Highlander Hybrid typically requires SAE 0W-16 synthetic oil. Always refer to the owner’s manual for the manufacturer’s recommendations.
To change the cabin air filter, open the glove box and remove the restraining arm. Press the sides inward to drop the glove box door, then remove the filter cover and replace the old filter with a new one. Reassemble in reverse order.
The 2020 Toyota Highlander Hybrid has a towing capacity of up to 3,500 pounds when properly equipped. Always consult the owner’s manual for detailed towing guidelines.
To pair your phone, enable Bluetooth on your device. On the vehicle’s multimedia screen, select 'Menu', then 'Setup', and 'Bluetooth'. Choose 'Add New Device' and select your phone from the list. Follow prompts to complete pairing.
Rapid battery drain may be due to leaving lights on, a failing alternator, or a bad battery. Check these components and ensure all electrical devices are turned off when the vehicle is not in use.
If the hybrid system warning light illuminates, safely pull over and turn off the engine. Restart the vehicle to see if the light remains on. If it does, have the vehicle inspected by a Toyota dealer or qualified technician as soon as possible.
To update the navigation system, visit the Toyota website to check for available updates. Download the update to a USB drive, then insert the USB into the vehicle's port. Follow the on-screen instructions to complete the update.