Toyota Highlander Hybrid 2008 Quick Reference Guide
![Toyota Highlander Hybrid 2008 SUV manual cover](/images/gKUOqMTNquiOKjNOicAJFEui/thumbs/thumb175x175.webp)
For the 2008 Toyota Highlander Hybrid, it is recommended to change the oil every 5,000 miles or 6 months, whichever comes first. Using synthetic oil can extend this interval, but always follow the manufacturer’s recommendations.
The 2008 Toyota Highlander Hybrid typically requires SAE 5W-30 oil. Using synthetic oil can provide better engine protection and performance. Always check your owner’s manual for the recommended oil type.
To reset the maintenance light, turn the ignition to the "ON" position. Make sure the odometer is set to display the total miles. Turn the ignition off, then press and hold the trip meter reset button while turning the ignition back to the "ON" position. Hold the button until the maintenance light turns off.
The recommended tire pressure for the 2008 Toyota Highlander Hybrid is typically 32 psi for both front and rear tires. Always check the sticker inside the driver's door for the most accurate information.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements. Keep tires properly inflated, avoid excessive idling, and drive at moderate speeds. Using the ECO mode can also help enhance fuel economy.
Common issues include inverter failure and battery problems. Regular maintenance and timely replacements are crucial. Consider having a professional diagnostic check if abnormal noises or performance issues arise.
Open the glove compartment and remove the dampener arm. Squeeze the sides of the glove box to release it from its position. Locate the cabin air filter cover, unclip it, and replace the old filter with a new one, ensuring it is properly aligned.
The 2008 Toyota Highlander Hybrid has a towing capacity of up to 3,500 pounds when properly equipped. Always ensure your vehicle is equipped with the necessary towing package and adhere to safety guidelines.
To check for errors, use an OBD-II scanner that can read hybrid systems. Connect it to the diagnostic port under the dashboard and follow the scanner’s instructions to retrieve any error codes. Consult a professional mechanic if issues arise.
To jump-start, locate the jump-start terminal in the engine compartment. Connect the positive jumper cable to the positive terminal and the negative cable to a solid metal point on the vehicle. Start the donor vehicle and then the Highlander. Remove cables in reverse order.