Toyota Highlander 2016 Quick Reference Guide

To reset the maintenance light, turn the ignition key to the 'ON' position without starting the engine. Use the Odometer button to display "TRIP A". Turn the ignition off, press and hold the Odometer button, turn the ignition back on, and wait for the maintenance light to blink and turn off. Release the button.
The recommended oil type for the 2016 Toyota Highlander is 0W-20 synthetic oil. Always refer to the owner's manual for the most accurate information.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, performing regular maintenance, using cruise control on highways, avoiding excessive idling, and removing unnecessary weight from the vehicle.
Common causes include leaving lights on, a faulty alternator, corroded battery connections, or electronic accessories that continue to draw power when the vehicle is off.
To pair your phone, enable Bluetooth on your phone. On the Highlander's infotainment screen, go to 'Setup' > 'Bluetooth' > 'Add New Device'. Select your phone from the list and confirm the pairing code on both devices.
Squeaky brakes can be caused by worn brake pads, glazed rotors, dust or debris between the pads and rotors, or lack of lubrication on the brake components.
It's recommended to inspect the air filter every 15,000 miles and replace it every 30,000 miles, or sooner if driving in dusty conditions.
The 2016 Toyota Highlander has a towing capacity of up to 5,000 pounds when properly equipped, which includes a towing package.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector, remove the rubber dust cover, and unclip the bulb. Install the new bulb without touching the glass, and reassemble in reverse order.
Signs include uneven tire wear, the vehicle pulling to one side, a crooked steering wheel when driving straight, and vibrations in the steering wheel.