Toyota Highlander 2014 Quick Reference Guide
![Toyota Highlander 2014 SUV manual cover](/images/DfppjjPvzcFOZeFiFCOfsMTX/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position. Press the Odometer button until the total mileage is displayed. Turn the ignition off, press and hold the Odometer button, and turn the ignition back to "ON". Hold the button until the maintenance light turns off.
The recommended oil type for the 2014 Toyota Highlander is SAE 0W-20 full synthetic oil. It ensures optimal engine performance and fuel efficiency.
To pair your phone, enable Bluetooth on your phone and the vehicle. Go to the vehicle's multimedia system, select "Setup" > "Bluetooth" > "Add New Device". Follow the prompts on your phone to complete pairing.
The recommended tire pressure for the 2014 Toyota Highlander is typically 33 psi for both front and rear tires. Check the driver's side door jamb for specific information.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, drive at moderate speeds, and avoid excessive idling. Remove unnecessary cargo to reduce weight.
Engine overheating can be caused by low coolant levels, a faulty thermostat, a damaged radiator, or a malfunctioning water pump. Check these components and consult a mechanic if needed.
To replace the cabin air filter, open the glove compartment, remove the damper, and release the glove box. Remove the filter cover, replace the filter, and reassemble.
If the check engine light comes on, ensure the gas cap is tight, check for any obvious issues, and consult a mechanic to diagnose and resolve the underlying problem.
To change a flat tire, park on a level surface, apply the parking brake, and use the jack to lift the vehicle. Remove the lug nuts, replace the tire, and tighten the lug nuts in a star pattern.
The 2014 Toyota Highlander has a towing capacity of up to 5,000 pounds when properly equipped with the towing package.