Toyota Highlander 2010 Quick Reference Guide
![Toyota Highlander 2010 SUV manual cover](/images/NRFrHWkeqvevntxYYyOktRos/thumbs/thumb175x175.webp)
The recommended oil type for the 2010 Toyota Highlander is 0W-20 synthetic oil for the 2.7L engine and 5W-30 for the 3.5L V6 engine.
To reset the maintenance light, turn the ignition switch to the "ON" position, set the odometer to "ODO," turn the ignition off, hold the trip reset button, and turn the ignition back to "ON" without starting the engine until the light blinks and goes out.
The towing capacity of the 2010 Toyota Highlander is up to 5,000 pounds when properly equipped with the optional towing package.
It is recommended to change the transmission fluid every 60,000 miles under normal driving conditions.
The recommended tire pressure for the 2010 Toyota Highlander is 32 psi for both front and rear tires.
To replace the cabin air filter, open the glove box, detach the dampener arm, squeeze the sides together to lower the glove box, and replace the old filter with a new one in the filter housing behind the glove box.
Check for electrical drains, ensure the battery terminals are clean and secure, test the alternator, and consider replacing the battery if it is more than 3 years old or shows signs of failing.
The spare tire on a 2010 Toyota Highlander is located underneath the vehicle, accessible by lowering it from the rear using the provided tools in the trunk area.
To improve fuel efficiency, ensure regular maintenance, keep tires inflated to the correct pressure, drive at moderate speeds, and remove unnecessary weight from the vehicle.
Common issues may include oil leaks, water pump failures, and noisy suspension components. Regular inspections and maintenance can help mitigate these problems.