Toyota FJ Cruiser 2010 Quick Reference Guide
![Toyota FJ Cruiser 2010 SUV manual cover](/images/tWuCcHuPqdiAtXdKYaeDOiub/thumbs/thumb175x175.webp)
The recommended engine oil for the Toyota FJ Cruiser 2010 is 5W-30. It is essential to use high-quality oil that meets API grade SL or SM.
For optimal performance, it is advised to change the oil every 5,000 miles or every 6 months, whichever comes first. Regular oil changes help maintain engine health.
A common issue is the front suspension clunk noise. This can often be addressed by tightening the suspension components or replacing worn-out bushings.
Turn the ignition switch to the "ON" position, set the odometer to Trip A, then turn the ignition off. While holding the trip reset button, turn the ignition back to "ON" until the light goes off.
The Toyota FJ Cruiser 2010 has a towing capacity of 5,000 pounds, making it capable of towing trailers or small boats.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintaining correct tire pressure, and removing unnecessary weight from the vehicle.
Regularly inspect brake pads and rotors for wear, check brake fluid levels, and replace components as needed to ensure safe and effective braking performance.
To replace a headlight bulb, open the hood, remove the headlight cover, disconnect the electrical connector, remove the old bulb, and install the new one, ensuring it is secure.
If the 4WD system is not engaging, check the transfer case and front differential fluid levels, and inspect for any electrical issues or sensor malfunctions. Consult with a professional if the problem persists.
To ensure engine longevity, perform regular maintenance, use quality fuel and oil, replace air filters, and address any issues or warning lights promptly.