Toyota FJ Cruiser 2008 Quick Reference Guide

The 2008 Toyota FJ Cruiser requires 5W-30 synthetic oil, and the oil capacity is approximately 5.5 quarts with a filter change.
To reset the maintenance light, turn the key to the "ON" position, set the odometer to "ODO," turn the key off, press and hold the trip meter reset button, and turn the key back to "ON" until the light goes off.
The 2008 Toyota FJ Cruiser has a towing capacity of up to 5,000 pounds when properly equipped.
To engage the 4WD system, shift the transfer case lever to "H4" for high-speed four-wheel drive or "L4" for low-speed four-wheel drive, while the vehicle is in neutral or parked.
Common suspension issues include worn-out shocks or struts, which may lead to a bumpy ride and uneven tire wear. Regular inspection and maintenance are recommended to avoid these problems.
The 2008 FJ Cruiser uses a timing chain, which generally does not require replacement as it is designed to last the life of the engine, barring any mechanical issues.
The recommended tire pressure for the 2008 Toyota FJ Cruiser is 32 psi for both the front and rear tires.
To replace a headlight bulb, open the hood, disconnect the power connector from the bulb, remove the rubber cover, unclip the retaining spring, and replace the bulb with a new one. Reassemble in reverse order.
To change the air filter, locate the air filter housing in the engine bay, unclip the clamps, remove the old filter, insert the new filter, and secure the housing with the clamps.
The 2008 Toyota FJ Cruiser has an estimated fuel efficiency of 16 mpg in the city and 20 mpg on the highway.