Toyota Corolla iM 2018 Quick Reference Guide
![Toyota Corolla iM 2018 Hatchback manual cover](/images/IQafvutsFaBmmNiIFgbeGHJs/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the trip meter button to scroll to "Trip A." Turn the ignition off. While pressing the trip meter button, turn the ignition back to "ON." Hold the button until the maintenance light flashes and goes off.
The 2018 Toyota Corolla iM Hatchback typically requires SAE 0W-20 synthetic motor oil for optimal performance and efficiency.
To improve fuel efficiency, ensure your tires are properly inflated, maintain a steady speed, avoid rapid acceleration, and keep up with regular maintenance such as oil changes and air filter replacements.
The check engine light can illuminate for various reasons, including a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It's best to use an OBD-II scanner to read the error code or consult with a professional mechanic for accurate diagnosis.
The air filter should typically be replaced every 15,000 to 30,000 miles, but it's always a good practice to check your owner's manual for specific recommendations based on your driving conditions.
The recommended tire pressure for the 2018 Toyota Corolla iM is usually 33 psi for both front and rear tires, but it's important to check the sticker inside the driver's door for exact specifications.
To pair your phone, enable Bluetooth on your phone and in the Corolla iM's infotainment system. Select "Bluetooth" on the car's display, then "Add New Device." Select your phone from the list, and confirm the pairing request.
If the battery dies, you can jump-start the car using jumper cables and another vehicle. Connect the positive terminals first, then the negative. Start the working vehicle, then the Corolla iM. Let it run for a few minutes before removing the cables in reverse order.
To change a flat tire, ensure the car is on a stable surface and use the jack to lift the car. Remove the hubcap or wheel cover, loosen the lug nuts, remove the flat tire, and replace it with the spare. Tighten the lug nuts securely, lower the car, and replace the hubcap.
The 2018 Toyota Corolla iM is not specifically designed for towing. It's advisable to consult the owner's manual or a professional if towing is necessary to avoid potential damage to the vehicle.