Toyota Corolla Hybrid 2021 Quick Reference Guide

To reset the maintenance light, turn the ignition on without starting the engine, press the trip meter reset button until "Trip A" is displayed, turn the ignition off, hold the reset button, and then turn the ignition back on. Hold the button until the maintenance light resets.
The 2021 Toyota Corolla Hybrid typically requires SAE 0W-20 synthetic oil. Check the owner's manual for specific recommendations.
To improve fuel efficiency, maintain proper tire pressure, use cruise control on highways, avoid rapid acceleration and braking, and keep up with regular maintenance.
If the hybrid system warning light comes on, check for loose or damaged connections in the hybrid battery system, ensure the gas cap is tight, and consult with a Toyota service center if the issue persists.
Regular maintenance intervals for the 2021 Toyota Corolla Hybrid are typically every 5,000 miles or six months for basic service, but refer to the owner's manual for detailed maintenance schedules.
It is not necessary to warm up a Toyota Corolla Hybrid before driving. The vehicle is equipped with technology that allows it to operate efficiently from the start.
To jump-start, connect jumper cables to the 12V battery in the engine compartment. Attach positive to positive and negative to a grounded metal point. Start the assisting vehicle, then the Corolla Hybrid. Remove cables in reverse order.
If the key fob is not working, check if the battery needs replacement. If the problem persists, try reprogramming the fob or consult a Toyota dealer for assistance.
The 2021 Toyota Corolla Hybrid is not designed for towing. Refer to the owner's manual for detailed specifications and limitations.
To replace the air filter, open the hood, locate the air filter box, release the clips, remove the old filter, insert the new filter, and secure the box with the clips.