Toyota Corolla 2015 Quick Reference Guide
![Toyota Corolla 2015 Sedan manual cover](/images/MtDpPasjiPVQRqihNFjSiZzh/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Press and hold the trip meter reset button, then turn the ignition to the "OFF" position. While holding the button, turn the ignition back to "ON". Hold the button until the maintenance light turns off.
The recommended engine oil for a 2015 Toyota Corolla is SAE 0W-20. This oil is designed to provide optimal performance and fuel efficiency.
It is recommended to inspect the air filter every 15,000 miles and replace it approximately every 30,000 miles, or sooner if driving in dusty conditions.
If the AC is not blowing cold air, check if the refrigerant levels are low. Other potential issues could be a faulty compressor, a clogged filter, or a malfunctioning condenser. Consider having it inspected by a professional.
The recommended tire pressure for the 2015 Toyota Corolla is typically around 32 psi for both front and rear tires. Always check the tire placard located on the driver's side door jamb for the most accurate information.
To connect your smartphone, ensure Bluetooth is enabled on your phone. On the Corolla's display, go to "Setup" > "Bluetooth" > "Add". Select your vehicle on your phone's Bluetooth menu and confirm the passkey displayed on the screen.
If the check engine light is on, ensure the gas cap is tightened securely. If the light remains, use an OBD-II scanner to check for diagnostic trouble codes or have a professional technician diagnose the issue.
To replace the key fob battery, remove the key from the fob. Use a small screwdriver to gently pry open the fob. Replace the old battery with a new CR2032 battery. Reassemble the fob and test the functionality.
The 2015 Toyota Corolla is not specifically designed for towing and therefore does not have an official towing capacity. It's recommended to avoid towing with a Corolla to prevent damage.
To update the navigation system, visit the Toyota website to check for available updates. You may need to purchase an updated map SD card or download software updates onto a USB drive, which can then be uploaded to your vehicle's system.