Toyota Camry HV 2017 Quick Reference Guide

To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintaining correct tire pressure, and using the Eco mode feature. Additionally, avoid rapid acceleration and heavy braking to maximize fuel economy.
If the hybrid system warning light is illuminated, it is recommended to safely pull over and turn off the engine. Restart the vehicle to see if the light remains on. If it does, contact a Toyota dealership or a qualified technician for a diagnostic check.
To reset the maintenance required light, turn the ignition to the "ON" position without starting the engine. Press and hold the trip meter reset button, then turn the ignition to "ON" again. Continue holding the button until the maintenance light blinks and turns off.
The recommended tire pressure for the 2017 Toyota Camry HV is typically 35 psi for both front and rear tires. Always check the tire label on the driver's side door jamb for the most accurate information.
Toyota generally recommends checking the hybrid battery every 5,000 miles during routine maintenance visits. The hybrid battery itself is designed to last the lifetime of the vehicle, but regular checks can ensure optimal performance.
The 2017 Toyota Camry HV typically requires SAE 0W-20 synthetic oil. This type of oil is recommended for optimal performance and efficiency. Always refer to your owner's manual for specific recommendations.
To pair your phone, enable Bluetooth on your phone and navigate to the "Setup" menu on the Camry's infotainment system. Select "Bluetooth" and then "Add New Device." Follow the prompts to complete the pairing process.
Common causes for AC issues include a low refrigerant level, a malfunctioning compressor, or a clogged cabin air filter. It's advisable to have the system inspected by a professional if you're experiencing persistent issues.
To change a flat tire, first ensure the vehicle is on a flat surface and apply the parking brake. Loosen the lug nuts slightly, use a jack to lift the car, fully remove the lug nuts, and replace the flat tire with the spare. Secure the lug nuts in a star pattern and lower the vehicle.
To jump-start, connect the positive cable to your Camry's positive terminal, then to the donor vehicle's positive terminal. Connect the negative cable to the donor vehicle's negative terminal, and finally to an unpainted metal surface on your Camry. Start the donor vehicle, then your Camry. Remove cables in reverse order.