Toyota Camry HV 2016 Quick Reference Guide
![Toyota Camry HV 2016 Sedan manual cover](/images/kmDMibRCGAmYKUDFNfSRlcrs/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition key to the "On" position without starting the engine. Press and hold the trip meter reset button until the maintenance light turns off.
The 2016 Toyota Camry HV typically requires SAE 0W-20 synthetic oil for optimal performance and fuel efficiency. Always check the owner's manual for specific recommendations.
To improve fuel efficiency, ensure your tires are properly inflated, drive smoothly, and maintain regular service intervals. Reducing excess weight and avoiding idling can also help.
The recommended tire pressure for the 2016 Toyota Camry HV is typically 35 PSI for the front and rear tires. Always confirm using the tire information placard located on the driver's side door jamb.
To replace the cabin air filter, open the glove box, detach the dampener arm, squeeze the sides of the glove box inward, and remove the old filter from its housing. Insert the new filter and reassemble.
If the hybrid system warning light illuminates, safely pull over and turn off the vehicle. Restart to see if the light clears. If it persists, contact a Toyota dealer or qualified technician immediately.
To update the navigation system, visit the Toyota website to download the latest map updates or consult your dealer for assistance. Installation instructions are typically provided with the download.
Common causes of battery drain include leaving lights on, a faulty alternator, or electrical system issues. Regularly inspect and maintain the battery to prevent unexpected drain.
The 2016 Toyota Camry HV typically has a sealed transmission system. It is recommended to have a qualified technician check the fluid level and condition during regular maintenance intervals.
To jump-start the Camry HV, connect the positive cable to the positive terminal of the hybrid battery, and the other positive to the donor battery. Connect the negative cable to the donor battery's negative terminal and the other end to an unpainted metal surface on the Camry. Start the donor vehicle, then the Camry. Remove cables in reverse order.