Toyota Camry HV 2014 Quick Reference Guide
![Toyota Camry HV 2014 Sedan manual cover](/images/pToOMlmkcVApsgJsPPfPGNCg/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "On" position without starting the engine. Press and hold the trip meter reset button while turning the ignition to the "Off" position. Continue holding the button and turn the ignition back to "On." The maintenance light will flash and then go out.
The 2014 Toyota Camry HV is recommended to use SAE 0W-20 synthetic oil for optimal performance and fuel efficiency.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintain proper tire pressure, remove excess weight from the vehicle, and drive at a steady speed. Using the Eco mode can also enhance fuel efficiency.
If the vehicle won't start, check the battery connections and ensure they are clean and tight. Verify that the battery is charged. If the problem persists, it could be related to the starter or ignition system, and professional diagnostics may be necessary.
Open the glove box and remove the limiting stop arm. Press the sides of the glove box inward to release it completely. Locate the cabin air filter cover, remove it, and replace the old filter with a new one. Reassemble in reverse order.
The recommended tire pressure for the 2014 Toyota Camry HV is typically 35 psi for both front and rear tires. It's advisable to check the sticker on the driver's side door jamb for specific details.
To connect your phone via Bluetooth, enable Bluetooth on your phone, then press the "Setup" button on the vehicle's audio system. Select "Bluetooth" and then "Add New Device." Follow the prompts to pair and connect your phone.
The hybrid battery in a 2014 Toyota Camry HV typically requires minimal maintenance. However, it's recommended to have it inspected during routine service intervals, such as every 5,000 to 10,000 miles, or as specified in the owner's manual.
Common causes for a check engine light include a loose gas cap, faulty oxygen sensors, catalytic converter issues, or spark plug/ignition coil problems. A diagnostic scan will identify the specific issue.
To enable or disable the Eco mode, locate the Eco mode button on the center console. Press the button to toggle the mode on or off, which helps to optimize driving efficiency and reduce fuel consumption.