Toyota Avalon Hybrid 2021 Quick Reference Guide
![Toyota Avalon Hybrid 2021 Sedan manual cover](/images/jGgvUDHSYSYuIErKsnNWYcbI/thumbs/thumb175x175.webp)
To reset the maintenance required light, turn the ignition to the "ON" position without starting the engine. Press the trip meter reset button until "TRIP A" is displayed. Turn the ignition off, then hold the trip meter reset button while turning the ignition back to the "ON" position. Continue holding the button until the maintenance light turns off.
The recommended tire pressure for the 2021 Toyota Avalon Hybrid is typically 33 psi for both the front and rear tires. However, always check the sticker located on the driver’s side door jamb for the most accurate information.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, drive smoothly with gradual acceleration and braking, maintain proper tire pressure, and use the ECO driving mode.
The 2021 Toyota Avalon Hybrid typically requires SAE 0W-16 synthetic oil for optimal performance. Always verify with your owner's manual or a Toyota dealer.
To connect your phone via Bluetooth, turn on Bluetooth on your phone. On the vehicle's touchscreen, navigate to the "Setup" menu, then to "Bluetooth" settings. Select "Add New Device" and choose your phone from the list. Confirm any prompts on your phone to complete pairing.
The 2021 Toyota Avalon Hybrid is not specifically designed for towing and does not have a manufacturer-rated towing capacity. It's advisable to avoid towing with this vehicle.
To replace the wiper blades, lift the wiper arm away from the windshield. Press the small tab under the wiper blade to slide it off the arm. Align the new blade and slide it onto the arm until it clicks into place. Gently lower the wiper arm back onto the windshield.
To update the navigation system, visit the Toyota website to check for updates and download them onto a USB drive. Insert the USB drive into the vehicle's USB port, then follow the prompts on the infotainment screen to complete the update.
If the key fob battery is low, replace it by prying apart the key fob case with a flat tool, removing the old battery, and inserting a new CR2032 battery. Ensure it's oriented correctly, then snap the case back together.
To activate adaptive cruise control, press the "On/Off" button on the steering wheel. Accelerate to your desired speed, then press the "Set" button. Use the "Distance" button to adjust the following distance to the vehicle ahead.