Toyota 4Runner 2019 Quick Reference Guide
![Toyota 4Runner 2019 SUV manual cover](/images/kSjfIRHMAMDgvcHWyvVndWyk/thumbs/thumb175x175.webp)
To reset the maintenance light on your 2019 Toyota 4Runner, turn the ignition on without starting the engine. Use the trip meter reset button to select "Trip A". Turn the ignition off. Press and hold the trip meter reset button and turn the ignition back on. Continue holding the button until the maintenance light turns off.
The recommended tire pressure for the 2019 Toyota 4Runner is typically 32 PSI for both front and rear tires. However, always check the sticker on the driver's door jamb for the most accurate information.
To pair your phone with the 2019 Toyota 4Runner's Bluetooth system, enable Bluetooth on your phone. On the vehicle's audio system, go to 'Setup', then 'Bluetooth', and select 'Add New Device'. Choose your vehicle on your phone, then confirm the pairing code on both devices.
The 2019 Toyota 4Runner typically requires 0W-20 synthetic oil. It's best to consult your owner's manual or a professional for recommendations based on your specific driving conditions.
To replace the air filter in a 2019 Toyota 4Runner, open the hood and locate the air filter box. Unclip the latches, remove the old filter, and insert a new filter making sure it sits securely in the frame. Re-secure the latches.
If your 2019 Toyota 4Runner's key fob is not working, try replacing the battery. If the problem persists, it may require reprogramming or inspection by a professional for further issues.
To improve the fuel efficiency of your 2019 Toyota 4Runner, ensure regular maintenance, keep tires properly inflated, remove excess weight, and drive conservatively by avoiding rapid acceleration and maintaining a steady speed.
The towing capacity of the 2019 Toyota 4Runner is up to 5,000 pounds, depending on the equipment and configuration. Always refer to your owner's manual for exact specifications and ensure you have the proper towing equipment.
The 2019 Toyota 4Runner typically has a sealed transmission, meaning there is no dipstick for checking the fluid. It's recommended to have a professional check the transmission fluid during routine maintenance.
The check engine light on your 2019 Toyota 4Runner can be triggered by various issues, such as a loose gas cap, faulty oxygen sensor, or other engine-related problems. It's best to use an OBD-II scanner to read the error code or consult a professional mechanic.