Toshiba RAV-SM564BT-E Owner's Manual
![Toshiba RAV-SM564BT-E Air Conditioner manual cover](/images/ihhnNHvQvnFkWFEtlxWJVyTL/thumbs/thumb175x175.webp)
To change the temperature setting, use the remote control to press the up or down arrow buttons until you reach the desired temperature. Ensure the air conditioner is set to the correct mode (cooling or heating) for the temperature change to take effect.
First, check if the power cord is properly connected and that the circuit breaker is not tripped. If these are fine, try resetting the unit by turning it off and on again. If the problem persists, consult a professional technician.
It is recommended to clean the air filters every two weeks during periods of heavy use. This helps maintain efficient operation and air quality. Refer to your user manual for instructions on how to remove and clean the filters.
Error code E04 usually indicates a problem with the indoor air thermistor. This may require a professional inspection to diagnose and fix the issue properly.
Ensure that the unit is installed on a stable surface and check for any loose components or debris in the fan or vents. Regular maintenance, such as cleaning the filters and ensuring proper installation, can help minimize noise.
Yes, the Toshiba RAV-SM564BT-E is a reverse cycle air conditioner, which means it can be used for both cooling and heating. Ensure you switch the mode to 'heat' using the remote control.
In addition to cleaning the filters every two weeks, schedule a professional service check at least once a year to inspect the unit's components, check refrigerant levels, and ensure optimal performance.
To reset the air conditioner, turn off the unit and unplug it from the power outlet for about 5 minutes. Plug it back in and turn it on using the remote control.
Ensure that the drainage pipe is not blocked or damaged. If the issue persists, it might be due to improper installation or a blocked filter, and a professional technician should be consulted.
Check if the air filters are clean and the vents are not obstructed. Ensure that the temperature setting is lower than the room temperature and that the unit is in 'cool' mode. If the issue remains, the refrigerant level might be low and a professional should be contacted.