Thomson KGT300WD User Guide
![Thomson KGT300WD Refrigerator manual cover](/images/QRJnjAonGKptcWDHuGfyJawV/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control panel inside the refrigerator. Use the up and down buttons to set your desired temperature for both the fridge and freezer sections.
Check if the refrigerator is plugged in and the thermostat is set correctly. Ensure there is adequate ventilation around the appliance. Clean the condenser coils and check the door seals for any damage.
It is recommended to clean the condenser coils every six months to ensure efficient operation and prevent overheating.
Unusual noises could be due to the refrigerator not being level, items inside vibrating against each other, or the compressor running. Ensure the fridge is level and check for loose items.
To maximize energy efficiency, keep the refrigerator and freezer doors closed as much as possible, ensure the door seals are intact, and avoid overloading the fridge. Clean the condenser coils regularly.
To defrost the freezer, turn off the refrigerator and remove all items. Place towels to catch melting ice and leave the freezer door open. Once defrosted, clean the interior before turning it back on.
First, unplug the refrigerator. Locate the light cover and remove it. Unscrew the old bulb and replace it with a new one of the same wattage. Replace the cover and plug the refrigerator back in.
Check the door seals for any debris or damage. Ensure the refrigerator is level and adjust the feet if necessary. Rearrange items inside the fridge to prevent obstruction.
Unplug the refrigerator for about 5 minutes and then plug it back in. This can help reset the system. If the issue persists, consult the user manual or contact customer support.
Keep all food items covered or sealed, clean up spills immediately, and use baking soda or activated charcoal to absorb odors. Regularly clean the interior surfaces.