Sony SRS XB23 Operating Instruction
![Sony SRS XB23 manual cover](/images/3e1096b5901fe38821f80f0a/thumbs/thumb175x175.webp)
To pair your Sony SRS-XB23 with a Bluetooth device, turn on the speaker, press and hold the Bluetooth button until the indicator starts flashing, then select 'SRS-XB23' from the Bluetooth settings on your device.
If your SRS-XB23 won't turn on, ensure the battery is charged. Connect it to a power source using the USB cable. If it still doesn't turn on, try resetting the speaker by pressing the RESET button.
To reset your SRS-XB23, press and hold the Power button and the Volume Down button at the same time for about 5 seconds. The speaker will turn off and reset.
Yes, the Sony SRS-XB23 is waterproof with an IP67 rating, meaning it can be submerged in water up to 1 meter for 30 minutes. However, it should not be used in saltwater.
To enable Stereo Pair on the SRS-XB23, turn on both speakers, press and hold the Bluetooth button on one speaker, then press and hold the Volume Up and Power buttons on the other speaker simultaneously.
The Sony SRS-XB23 offers up to 12 hours of playtime on a full charge, depending on the volume level and type of audio content being played.
To update the firmware, download the 'Sony Music Center' app on your smartphone, connect to your SRS-XB23, and follow the instructions in the app to complete the update.
If the sound is distorted, check if the volume is set too high and reduce it. Also, ensure there are no obstacles between the speaker and the Bluetooth device, and try resetting the speaker.
To clean your SRS-XB23, gently wipe it with a soft, dry cloth. If needed, dampen the cloth slightly with water. Avoid using detergents, alcohol, or solvents.
Yes, you can use the Sony SRS-XB23 while it is charging, but it is recommended to avoid high volume levels to prevent overheating.