Sony SRS XB01 Operating Instruction

To pair your Sony SRS-XB01, turn on the speaker by pressing the power button. Enable Bluetooth on your device, then select 'SRS-XB01' from the list of available devices. The speaker's indicator will stay solid blue once connected.
Ensure the speaker is charged by connecting it to a power source using the supplied USB cable. If it still doesn't turn on, perform a reset by pressing and holding the power button for about 10 seconds.
Yes, you can use the Sony SRS-XB01 while it is charging. However, for optimal battery health, it's recommended to occasionally allow the battery to discharge before recharging fully.
To reset your Sony SRS-XB01, press and hold the power button for about 10 seconds until the indicator light turns off. Release the button, and the speaker will reset.
The Sony SRS-XB01 has an IPX5 water resistance rating, meaning it can withstand water splashes from any direction but should not be submerged in water.
Ensure the speaker is turned on and connected to your device. Check the volume levels on both the speaker and the connected device. Also, ensure the audio source is playing and not muted.
On a full charge, the Sony SRS-XB01 can last up to 6 hours, depending on the volume level and audio content.
Ensure there are no obstacles between the speaker and the connected device. Try re-pairing the devices or moving them closer together. Additionally, check for interference from other electronic devices.
The Sony SRS-XB01 supports pairing with multiple devices, but it can only maintain an active connection with one device at a time. To switch devices, disconnect the current one and connect the new device.
To clean the Sony SRS-XB01, gently wipe it with a soft, dry cloth. Avoid using any harsh chemicals or submerging the speaker in water. Ensure all ports are closed while cleaning.