Sony SRS U10 Operating Instruction
![Sony SRS U10 manual cover](/images/51e1af841ff9d39ac94d9016/thumbs/thumb175x175.webp)
To pair your Sony SRS U10 speaker with a Bluetooth device, turn on the speaker and activate the Bluetooth pairing mode by pressing the Bluetooth button. Then, enable Bluetooth on your device and select 'Sony SRS U10' from the list of available devices.
If the sound is distorted, reduce the volume on your connected device and speaker. Ensure there are no obstructions between the speaker and the Bluetooth device, and check that the speaker's battery is sufficiently charged.
Yes, you can use the Sony SRS U10 speaker while it is charging. Connect the speaker to a power source using the supplied USB cable and continue to enjoy your music.
The Sony SRS U10 has an IPX4 water resistance rating, meaning it is splash-proof and can withstand small splashes of water. It is not fully waterproof, so avoid submerging it in water.
To reset the Sony SRS U10 speaker, press and hold the power button and the volume down button simultaneously for about 5 seconds until the speaker turns off. This will reset the speaker to its factory settings.
The Sony SRS U10 speaker has a maximum Bluetooth range of approximately 10 meters (33 feet) in an open area without any obstructions.
If the speaker does not turn on, try resetting the device. Additionally, ensure that the charging cable and power source are working properly. If the issue persists, contact Sony support for assistance.
To improve battery life, avoid excessive volume levels, keep the speaker in a cool environment, and disconnect the Bluetooth device when not in use. Regularly update the speaker's firmware if updates are available.
Yes, you can connect two Sony SRS U10 speakers together wirelessly for stereo sound using the Party Connect feature. Refer to the user manual for detailed setup instructions.
Ensure that you are using the correct charging cable and adapter. Check for any debris in the charging port and try using a different power source. If the issue continues, contact Sony support.