Sony SRS T70 Operating Instruction
![Sony SRS T70 manual cover](/images/f777acca96b8146b4c4c9699/thumbs/thumb175x175.webp)
To connect your Sony SRS-T70 to a Bluetooth device, turn on the speaker and activate the Bluetooth pairing mode by pressing and holding the Bluetooth button until the indicator starts flashing. Then, on your Bluetooth device, search for available devices and select "Sony SRS-T70" to pair.
If your Sony SRS-T70 is not turning on, ensure the battery is charged by connecting it to a power source using the provided charger. If it still doesn't turn on, perform a reset by pressing and holding the power button for 10 seconds.
To reset your Sony SRS-T70 to factory settings, press and hold the power button and the volume down button simultaneously until the speaker turns off. This will reset the speaker to its original factory settings.
To clean your Sony SRS-T70 speaker, use a soft, dry cloth to wipe the exterior. Avoid using any harsh chemicals or abrasive materials. Ensure the speaker is powered off and unplugged before cleaning.
The Sony SRS-T70 offers approximately 12 hours of battery life on a full charge, depending on the volume level and audio content.
The Sony SRS-T70 can pair with one device at a time. To switch devices, disconnect the current device and pair the new one using the Bluetooth settings.
If there is no sound from your Sony SRS-T70, check the volume level and ensure it is not muted. Verify the Bluetooth connection on the source device and ensure audio playback is active. Restart both the speaker and the source device if necessary.
To update the firmware on your Sony SRS-T70, download the latest firmware from the Sony support website and follow the provided instructions. Typically, updates are performed via a USB connection to your computer.
The Sony SRS-T70 is not water-resistant. Avoid exposing it to water or moisture to prevent damage.
Yes, you can use the Sony SRS-T70 while it is charging. Simply connect it to a power source and continue using it as normal.